- Home
- »
- Our Products
- »
- Membrane Filter Holder
Membrane Filter Holder
The stainless steel sanitary filter holder is ideal for filtration of liquids or gas. Tri-Clamp sanitary inlet and outlet connections have no screw threads to trap contaminant and easily cleaned.
Features
All wetted metal are constructed of stainless steel
The surfaces are mechanical polished
Tri-Clamp sanitary inlet and outlet
IFH-L47 Inline Filter Holder
Brand | Aone |
Material | SS |
Max Differential Pressure | 30 psi |
Working Temperature | 121 Degree C |
Hose Connection | 1/2 inch |
Material Grade | 304 SS or 316 SS |
Filtration Area | 3.8 cm2 |
Filter Diameters | 47 mm |
Max Inlet Pressure | 3.5 bar |
Inlet Pressure | 50 mm |
Differential Pressure | 30 psi |
Pre filter size | 35 mm (47 mm if membrane and mesh separator) |
This 47mm in-line holder (Model IFH47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The back-pressure support screen protects the filter from rupture during reverse pressure surges. Upstream vent enables venting at any time during filtration. Dual sealing system compresses filter to ensure no lateral wicking / leaking.
Locking ring enables filter changes without disconnecting from lines. Unit comes standard with silicone o-ring and FPM vent o-ring. When filtering gases, it is recommended that a second support screen be used upstream of membrane. Replacement parts and alternate o-ring materials are available.
Applications:
- Sterilize and ultra clean liquids and gases under positive pressure. Sterilize with membrane in place for microbiological studies. Install for point-of-use filtration on filling machines. General particulate analysis
Stainless steel Vaccum filter Holder
Minimum Order Quantity: 20 Piece
Capacity | 100 , 300, 500,1000 ml |
Type | C type Clamp |
Power | vacuum pressure |
Application | Microbiological test Vacuum filtration Suspended solid test |
Country of Origin | Made in India |
Model | VFH300, VFH500 |
Brand | Aone |
80mm dia. X 150mm | 1kg |
- Hnadle c-lock connection (VFH) facilitates fast and stable installation one hand opration .
- ss 316l Membrane support screen
- Membrane guide on the support base helps position membrane easily.
- Forceps access ring points on support base help retrieve membrane without damage.
- SS 316 funnel is shatterproof, durable and can be fast sterilized by flame.
- No. 8 Stopper is a standard accessory.
Additional Information:
- Item Code: VFH300_500
- Production Capacity: 1000 per month
- Delivery Time: Ready Stock
- Packaging Details: Corrugated Box
MFH142 Membrane Filter Holder
Usage/Application | Chemical Laboratory |
Brand | A One |
Material | Stainless Steel |
Inlet Pressure | 99 psi |
Differential Pressure | 42 psi |
Filtration Area | 113 cm2 |
Prefilter size | 76 mm |
Hose Connection | 1/2 inch |
Material Grade | 304 SS and 316 SS |
Pre Filter Size | 124 mm |
Filter Diameters | 142 mm |
Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough cleaning. Clean holder design minimizes resistance and maximizes flow rate.
Use in-line to ultraclean or sterilize gases or liquids such as blood fractions, pure water, and pharmaceutical applications.
The holder features a PTFE coated photo etched stainless steel filter support screen for autoclaving with filter in place. Fittings are 1.5″ with tri-clamp to 14.3mm hose barb. Unit comes standard with silicone o-ring. Other materials are available. Seal membrane by hand tightening locking wing nuts.
Additional Information:
- Item Code: aonemfhsc142
MFH90 Membrane Filter Holder
Minimum Order Quantity: 1 PIECE
Usage/Application | Chemical Laboratory |
Color | Silver |
Brand | A One |
Material | Stainless Steel |
Finishing Type | Electro Polish |
Inlet Pressure | 99 psi |
Steel Grade | 304 SS and 316 SS |
Filter Diameters | 90 mm |
Model | MFH90 |
Differential Pressure | 42 psi |
Filtration Area | 45 cm2 |
Pre Filter Size | 76 mm |
Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough cleaning. Clean holder design minimizes resistance and maximizes flow rate.
Use in-line to ultraclean or sterilize gases or liquids such as blood fractions, pure water, and pharmaceutical applications.
The holder features a PTFE coated photo etched stainless steel filter support screen for autoclaving with filter in place. Fittings are 1.5″ with tri-clamp to 14.3mm hose barb. Unit comes standard with silicone o-ring. Other materials are available. Seal membrane by hand tightening locking wing nuts.
47 MM Inline Pressure Filter Holder
Minimum Order Quantity: 2 Pack
Usage/Application | Industrial |
Brand | A-One |
Material | stainless steel |
Automation Grade | Manual |
Color | silver |
Body Material | stainless steel |
Sanitary Stainless Steel In-Line Filter Holder, for 47 mm membranes
- Sanitary inlet and outlet connections are non-threaded and can be completely disassembled for thorough cleaning.
- 47 mm holder features vent to allow air venting on upstream side of the membrane at any time during filtration
IFH-H47 Inline Filter Holder
Usage/Application | Laboratory |
Material | Stainless Steel |
Model Name/Number | IFH-H47 |
Shape | Round |
Filter Diameters | 47 mm |
Material Grade | 304 SS or 316 SS |
Inlet Pressure | 99 mm |
Differential Pressure | 42 psi |
Filtration Area | 3.8 cm2 |
Pre Filter Size | 35 mm (47mm if membrane and mesh separator) |
This 47mm in-line holder (Model IFH47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The back-pressure support screen protects the filter from rupture during reverse pressure surges. Upstream vent enables venting at any time during filtration. Dual sealing system compresses filter to ensure no lateral wicking / leaking.
Locking ring enables filter changes without disconnecting from lines. Unit comes standard with silicone o-ring and FPM vent o-ring. When filtering gases, it is recommended that a second support screen be used upstream of membrane. Replacement parts and alternate o-ring materials are available.
Applications:
- Sterilize and ultra clean liquids and gases under positive pressure. Sterilize with membrane in place for microbiological studies. Install for point-of-use filtration on filling machines. General particulate analysis
IFH47 TC Fitting Inline Filter Holder
Usage/Application | Laboratory |
Material | Stainless Steel |
Model Name/Number | IFH47 (TC fitting) |
Inlet Pressure | 99 mm |
Differential Pressure | 42 psi |
Filtration Area | 3.8 cm2 |
Pre Filter Size | 35 mm (47mm if membrane and mesh separator) |
Material Grade | 304SS or 316SS |
This 47mm in-line holder (Model IFH47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The back-pressure support screen protects the filter from rupture during reverse pressure surges. Upstream vent enables venting at any time during filtration. Dual sealing system compresses filter to ensure no lateral wicking / leaking.
Locking ring enables filter changes without disconnecting from lines. Unit comes standard with silicone o-ring and FPM vent o-ring. When filtering gases, it is recommended that a second support screen be used upstream of membrane. Replacement parts and alternate o-ring materials are available.
Applications:
- Sterilize and ultra clean liquids and gases under positive pressure. Sterilize with membrane in place for microbiological studies. Install for point-of-use filtration on filling machines. General particulate analysis
MFH293 Membrane Filter Holder
Minimum Order Quantity: 3 Piece
Usage/Application | Chemical Laboratory |
Brand | A One |
Size | 293 mm |
Material | Stainless Steel |
Inlet Pressure | 99 psi |
Material Grade | 304 SS and 316 SS |
Differential Pressure | 42 psi |
Filtration Area | 530 cm2 |
Pre Filter Size | 257 mm |
Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough cleaning. Clean holder design minimizes resistance and maximizes flow rate.
Use in-line to ultraclean or sterilize gases or liquids such as blood fractions, pure water, and pharmaceutical applications.
The holder features a PTFE coated photo etched stainless steel filter support screen for autoclaving with filter in place. Fittings are 1.5″ with tri-clamp to 14.3mm hose barb. Unit comes standard with silicone o-ring. Other materials are available. Seal membrane by hand tightening locking wing nuts.
Filtration Equipment Stainless Steel Holder Reservoir
Minimum Order Quantity: 1 Piece
Brand | AONE |
Material | stainless |
Volume Size | 1000 ml |
Diameter | 47 mm |
Pack Size | 1 |
Filter Size | 47 mm , 90 mm , 142 mm |
Large Stainless Steel Holders with Reservoirs
• Designed for filtering small batches of liquid without having to use a separate pressure vessel- • Separate ports for pressurizing the reservoir and for adding additional sample
- • Membrane sealed internally by hand-tightening locking wing nuts With Inline Filter Holder
- Filter Size - 47 mm , 90 mm , 142 mm
- • Available in either type 304 or 316 stainless steel APPLICATIONS
- • Sterilizing, ultracleaning, and flow decay tests for pilot studies
- • Suitable for hazardous toxicity testing and TCLP
- • Optional back pressure screen recommended for intermittent fill operations
Products specifications
Volume | 1000 ml |
Diameter | 47 mm |
Pack Size | 1 |
47 Mm Inline Pressure Filter Holder
Minimum Order Quantity: 2 Pack
Size | 13 mm, 25mm, 47mm, 90 mm |
Application | For liquid, gas, solvent filtration, applied presssure & vaccum filtration |
Use | Liquid, solvent, syrem ,gasses |
Brand | Aone |
Material | Ss316,pp, ptfe |
SS 316 Vacuum Filter Holder
Minimum Order Quantity: 100 Piece
Brand | A One |
Capacity (ml) | 250 ml |
Finishing | Galvanized |
Material | Stainless Steel |
Material Grade | SS316 L |
Filter Size | 47 mm |
Seal | Silicon |
Vacuum filtration is used primarily in microbiological and
analytical procedures that involve collecting a particulate (bacteria, precipitate, etc.) from a liquid suspension.
Liquid poured into a funnel passes through a filter, which retains the particulate,and filtrate can be collected into a filter flask, directly or via a vacuum manifold. Applying vacuum reduces process time compared to gravity flow.
AONE supplies a wide range of Vacuum filter holders and accessories. Select from glass, polysulfone, or stainless
steel assemblies with funnels holding from 22 to 1,100 mL
See facing page for more details on supports.
Aone Mobile phase filtration is a simple and economical way to extend the lifetime of HPLC instrument supplies. It reduces instrument downtimes and helps to maintain the precision of the HPLC system. The negative effects of improper filtration practices are often underestimated, and can impact almost every part of the flowpath. Most HPLC supplies maintain tasks such as replacing pump seals are considered mandatory procedures, but mobile phase and sample filtration are often forgotten. The use of Ultrapure prefiltered organic HPLC solvents renders the filtration process not required. However, using water-based buffer solutions, predominant with Biopharma applications, makes it mandatory to filter the mobile phases. Residue of undissolved salt crystals can lead to reduced pump seal lifetimes, and microbial growth can cause increased baselines and capillary and column clogging. Therefore, filtering mobile phase buffers should be done daily through a 0.2 µm filter, and should be considered a routine part of sample analysis. solvent filtration assembly is manufactured from high-quality borosilicate glass components, and can hold a 47 mm membrane filter to remove particulates from liquid media,Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
SS Filter Housing Tanks
Size | 10 , 20 , 30 etc |
Housing Connection | Flange Type, Thread Type, Hose End Connection |
Material Grade | Stainless Steel 304 , 316 |
In compliance with customers' changed provisions and demands, we are instrumental in presenting a distinctive gamut of SS Filter Housing Tanks.
Features:
- Corrosion resistant AS-316 for broad chemical resistance
- High flow rates and extending the continues filtration procedures.
- Sanitary connections are easy to use and suitable for process.
- Housing are autoclave and can be cleaned easily to avoid cross contamination.
Specifications:
- Size: 10 , 20 , 30 etc
- End Con: 1/2"( CUSTOMIZE)
- Accommodation: Single, 3, 5, 7, 9 etc
- Housing Connection: Flange Type, Thread Type, Hose End Connection
- MOCK: Stainless Steel 304 , 316
Applications:
- Pharmaceutical Industry
- Petrochemical Industry
- Semiconductor
- Beverage Industry
- Pharmaceutical Industry
- Semiconductor
- Optoelectronics
- Facility Recycling
- Pharmaceutical Industry
- Waste Water Filtration