A-One Engg. Works

Sterility Test Unit Complete Kit (Inbuilt Clamp)

Description:

• • Filter Funnel S.S.316 With Inbuilt S.S. Clamp(With MOC Test Report)
  • SS Lid & Neoprene Cork Capacity 300 ml
  • Manifold Three Place S.S. With PTFE Valve/2 Way
  • Stage- 3,6
  • Membrane Filter 47 Mm/0.45 Mm Pack Of 100
  • Vacuum Flask 1 Liter
  • Vacuum Pump Diaphragm Type-Oil Free Single Stage
  • Air Vent Filter- Hydrophobic PTFE 50 mm/ 0.2mm
  • Flexible Silicon Tubing 2m.

Filter Funnel : manifold for sterility test: this mechanism is to accept up to three 47mm, dia filter funnels. this mechanism can be connected in series to the same vacuum source to expand capacity if required. large support base provides excellent stability each of the three vacuum outlets has leak-proof, two-way stopcock & a vent to accepts filter funnel through silicon rubber cork

Manufacturing SS Vacuum Filter Holder Microbiology & Laboratory Testing instruments in wide range avatar of configuration.

Feature:

The Filter Holder Made of 316 as with Fine polished.

Excellent chemical resistance and canoe vastly sterilized by flame or liquid.

Special design for microbiology filtration.

Special adapter provide for proper sealed locking.

Application:

For micro biology, biochemistry, hydrology (DNA/RNA)

Beverage analysis & food testing.

Protein binding, gravimetric analysis, California, yeast, mold total bacteria & sterility testing.

Ideal for water & waste water analysis.

Residue precipitate analysis and contamination tests.

General Liquid Filtration.

Vacuum filtration manifold is a laboratory apparatus used for the simultaneous filtratVion of multiple samples. It's commonly employed in chemistry, biology, and related fields for applications like separating bacteria, purifying solvents, and analyzing water quality. The manifold allows for efficient and consistent filtration by utilizing vacuum pressure to draw liquids through filter membranes, leaving behind solid particles. • 3 & 6 Stage Manifold with PTFE Valve

• SS-316 Filter Funnel 300ml
• Vacuum Flask 2 Ltr.
• Oil Free Vacuum Pump AE45s for 3 Stage
• Oil Free Vacuum Pump AE75s for 6 Stage
• Air Vent Filter PTFE 50mm / 0.2um
• 47mm x 0.45um Cellulose Nitrate Membrane FIlter Paper
• Vacuum Trap / Borosilicate flask with Silicon Tube – 2m.
• Forceps.

Description:

• • Filter Funnel S.S.316 With Inbuilt S.S. Clamp(With MOC Test Report)
  • SS Lid & Neoprene Cork Capacity 300 ml
  • Manifold Three Place S.S. With PTFE Valve/2 Way
  • Stage- 3,6
  • Membrane Filter 47 Mm/0.45 Mm Pack Of 100
  • Vacuum Flask 1 Liter
  • Vacuum Pump Diaphragm Type-Oil Free Single Stage
  • Air Vent Filter- Hydrophobic PTFE 50 mm/ 0.2mm
  • Flexible Silicon Tubing 2m.

Staeinless Steel Filter Holder• MOC : SS316• Support screen : SS316• Stopper : Silicone Rubber• Clamp : Inbuilt SS316• Filter Size : 47mm• Funnel Capacity: 300ml, 500ml, 1000m.l

Pressure FIltration Holders• Seal membrane by hand tightening locking wing nuts• Optimal holder design minimizes resistance and maximizes flow rate• Each unit labeled with identifying serial numbers on the outside of both the inlet and outlet platesApplications• In-Line Gas or Liquid Filtration.• Ultraclean or sterilize gas or Liquid• Flow Decay tests for pilot studies• Hazardous toxicity testing and TCLP                

In-line Filter Holder 47MM
• Inline stainless steel holders are for Liquid and Gas applications.• Use for point-of-use filtration on sterile filling machines and for lab or pilot scalesterile filtration applications.• The sanitary inlet and outlet connections are non-threaded and easily disassembledfor thorough cleaning.

SS Filter Holder (Duck Clamp)• MOC : SS316• Support screen :• Stopper : Silicone Rubber• Clamp : Duck Clamp Anodized Aluminum• Filter Size : 25mm, 47mm, 90 mm• Funnel Capacity: 300ml, 500ml, 1000ml. Stainless steel holders differ in hopper capacity (300 ml, 500 ml or 1000 ml) and valve type. They are specially designed for applications in which particles or microorganisms need to remain on the surface of membrane filters. The stainless steel frit ensures a uniform distribution of retained particles over the entire surface of the membrane filter. Special features make it easy to use these filter holders during routine testing. Easy to handle with a single clamp for secure attachment or convenient funnel removal.

Designed for filtering particles, bacteria and other substances, this Vacuum Filtration Apparatus has a  filter flask, a graduated funnel and an aluminum clamp with a secure, firm grip. This Filtration Apparatus is manufactured from high-quality borosilicate glass, with uniform wall thickness, no bubbles, beautiful appearance, and can be used for sterilization under high temperature and high pressure. It has good sealing performance, fast flow rate and standard grinding. The device is lined with microporous membrane for chemical analysis, hygienic testing, biopharmaceutical and pesticide, petroleum, environmental testing and other sample filtration to detect and remove particles and bacteria in liquids.

 

Product Description:

Vacuum Filtration Manifold is used primarily in microbiological, Sterility and analytical procedures that involve collecting a particulate (bacteria, precipitate, etc.) from a liquid suspension. They are particular designed and produced for several samples filtrate at the same time. Because each filter holder has individual control valve, only one set vacuum pump can sustain the single or Multi-branch manifold filter operate together.

• Two- and three-way valves feature PTFE stopcocks for smooth control
• Valves provide independent control at each branch for vacuum and venting
• Connect three or six filter holders to one Vacuum source

Specification :   

• Material Of Manifold: Stainless Steel
• No of Branches: 1,3,6 With PTFE Valve
• Membrane Diameter: 47mm Effective Filtration Area: 13.5 Cm2.
• Supported Funnels:  Polypropylene, SS-316, Borosilicate Glass, and PSU.
• Supported Volume Of Funnel: 300ml, 500ml, and 1000ml.

Optional: Diaphragm Vacuum Pump, Sterile Membrane, Flame Sterilization Tool, Tweezer, Flask Fittings

Capsule filtration systems are used across various industries to remove contaminants from liquids and gases. They are particularly useful in pharmaceutical, bioprocessing, and food and beverage applications where high levels of purity and sterility are essential. These self-contained, disposable filters are designed for easy use and reliable performance, making them suitable for both small-scale laboratory work and larger production processes. Applications:

• Pharmaceuticals:Capsule filters are crucial for ensuring the purity of injectable solutions and media by removing bacteria and particulates. They are used in both large-scale production and laboratory settings. 
• Bioprocessing:These filters are essential for purifying proteins, filtering growth media, and harvesting cells, maintaining the integrity of biological components while removing contaminants. 
• Food and Beverage:They are used to filter liquids like juices, wines, and bottled water, ensuring product safety and quality by removing microorganisms and particulates. 
• Chemical Industry:Capsule filters are used for filtering process chemicals, ultrapure water, and gases, protecting sensitive components from contamination. Benefits:
  • Reduced Contamination:Capsule filters effectively remove particulate and microbial contaminants, ensuring the quality and safety of the filtered product. 
  • Improved Product Quality:By removing impurities, capsule filters help to improve the quality and purity of the final product. 
  • Cost-Effective:In some applications, capsule filters can be a cost-effective solution compared to other filtration methods, particularly in smaller-scale operations. 
   

Membrane Types Applications:

Nylon 66

• hydrophilic membrane
• filtration rate: fast
• strong protein binding capacity
• solvent compatibility: “weak” organic solvents (alcohols, acetonitrile), aqueous solutions, base solutions, THF
• not recommended for: strong acids, halogenated hydrocarbons
• use: for general filtration and filtration of HPLC samples

PTFE (Teflone)

• hydrophobic membrane
• filtration rate: medium
• low dissolution, best solvent resistance
• solvent compatibility: “strong” organic solvents, strong acids, strong alkalis, chlorinated hydrocarbons
• not recommended for: aqueous solutions
• use: for organic solvents, general filtration and filtration of HPLC samples

M. E. Cellulose (mixed cellulose ester, nitrate and acetate)

• hydrophilic membrane
• filtration rate: medium
• solvent compatibility: aqueous solutions, ”weak” base solutions, hydrocarbons
• not recommended for: ”strong” organic solvents, strong acids, strong bases
• used for the filtration of aqueous solutions, biological samples and HPLC samples

Component:

• 13mm S. S.316 Filter Holder
• HPLC Needle
• 5ml Gas Tight Syringe
• Nylon 66 Membrane Filter13mm x 0.2μ (Pk. of 100 Nos.)

Vacuum Filtration Manifold is used primarily in microbiological, Sterility and analytical procedures that involve collecting a particulate (bacteria, precipitate, etc.) from a liquid suspension. They are particular designed and produced for several samples filtrate at the same time. Because each filter holder has individual control valve, only one set vacuum pump can sustain the single or Multi-branch manifold filter operate together.

• Two- and three-way valves feature PTFE stopcocks for smooth control
• Valves provide independent control at each branch for vacuum and venting
• Connect three or six filter holders to one Vacuum source

Optional :

• Diaphragm Vacuum Pump
• Sterile Membrane
• Flame Sterilization Tool
• Tweezer
• Flask Fittings

For laboratory, industrial sample process Filtration useEstablished in the year 2007, A One Engineering Works is one of the leading manufacturer, trader and exporter engrossed in offering a wide variety of products such as Sterility Testing Manifold System, Membrane Filter Holder, Syringe Filter, Industrial Rota Meter, Lab Furniture, Storage Tanks, Silicon And Gaskets Products, Filter Holder, Level Sensor, Water Testing Equipments, HPLC Consumable, GC Consumable, Laboratory Equipments, Disposable Funnel, Sterility Test Apparatus, Rubber Stoppers and many more products.

Vacuum filtration manifold is a laboratory apparatus used for the simultaneous filtratVion of multiple samples. It's commonly employed in chemistry, biology, and related fields for applications like separating bacteria, purifying solvents, and analyzing water quality. The manifold allows for efficient and consistent filtration by utilizing vacuum pressure to draw liquids through filter membranes, leaving behind solid particles. • 3 & 6 Stage Manifold with PTFE Valve

• SS-316 Filter Funnel 300ml
• Vacuum Flask 2 Ltr.
• Oil Free Vacuum Pump AE45s for 3 Stage
• Oil Free Vacuum Pump AE75s for 6 Stage
• Air Vent Filter PTFE 50mm / 0.2um
• 47mm x 0.45um Cellulose Nitrate Membrane FIlter Paper
• Vacuum Trap / Borosilicate flask with Silicon Tube – 2m.
• Forceps.

Stainless Steel Filter Holder• MOC : SS316• Support screen : SS316• Stopper : Silicone Rubber• Clamp : Inbuilt SS316• Filter Size : 47mm• Funnel Capacity: 300ml, 500ml, 1000m.l

High-quality, corrosion-resistant in-line filter holder is designed for stack sampling.

• Membrane or glass fiber filters
• Holder opens and closes easily
• Filter remains undisturbed for particulate analysis
• Upstream threaded vent allows release of trapped gas during liquid filtration

Body, center ring collar, support screen, and underdrain disc are made of Type 316 stainless steel. Captive thrust ring is PTFE; O-ring is Viton® rubber; hose barb adapters are polyethylene. Inlet/outlet connections: 9.5 mm (3/8") FNPT. Hose barbs accept 6.4 mm (1/4") I.D. tubing. Autoclavable.

Description

High Quality, Corrosion-Resistant Holders for viscus Sampling

• Stainless steel construction offers excellent chemical resistance.
• Holders open and close easily. Filter remains undisturbed for particulate analysis.
• Upstream threaded vent on 47 mm holder allows release of trapped gas during liquid filtration.
• Convenient in-line opening and closing capability.

Specifications

25 , 47 mm In-line Stainless Steel Holder with TC Clamp

Materials of Construction

• Body, Underdrain Disc, and Support Screen: Type 316 stainless steel
• Hose Barb Adapters: Nylon
• Center Ring Collar: Type 303 stainless steel
• O-ring: Viton^◆

Effective Filtration Area

• 3.7 cm²

Dimensions

• Overall Length (Excluding Hose Barb): 4.0 cm (1.6 in.)
• Diameter: 3.7 cm (1.5 in.)

Inlet/Outlet Connections

• ¹⁄₈ in. FNPT; hose barb adapters accept 6.4 mm (¹⁄₄ in.)
• ID tubing

Maximum Operating Temperature

• Limited by filter type or by Viton O-ring 204 °C (399 °F) or by Nylon adapter 121 °C (250 °F)

Maximum Operating Pressure

• 14 bar (1400 kPa, 200 psi)

Sterilization

• Provided non-sterile; autoclavable at 121 to 123 °C (250 to 253 °F) at 1.0 bar (100 kPa, 15 psi) for 15 to 20 minutes.

47 mm In-line Stainless Steel

Materials of Construction

• Body: Type 316 stainless steel
• Hose Barb Adapters: Polyethylene
• Support Screen and Underdrain Disc: Electropolished type 316 stainless steel
• O-Ring: Viton
• Thrust Ring: PTFE
• Center Ring Collar: Type 303 stainless steel

Effective Filtration Area

• 9.6 cm²

Dimensions

• Overall Length (Excluding Hose Barb): 5.7 cm (2.2 in.)
• Diameter: 5.9 cm (2.3 in.)

Inlet/Outlet Connections

• ³⁄₈ in. FNPT; hose barb adapters accept 6.4 mm (¹⁄₄ in.) ID tubing

Maximum Operating Temperature

• Limited by filter type or by hose barb 93 °C (199 °F)

Maximum Operating Pressure

• 14 bar (1400 kPa, 200 psi)

Sterilization

• Provided non-sterile; autoclavable at 121 to 123 °C (250 to 253 °F) at 1.0 bar (100 kPa, 15 psi) for 15 to 20 minutes.

Applications

• Designed for in-line liquid or gas filtration.
• Durable construction for stack sampling.

Specification:
MOC : Polypropylene
Filter Size : 47mm
Funnel Capacity: 100ml & 250ml

Gamma Sterilization Packing

DMF100 – Disposable M-Funnel 100 ml

Disposable M-Funnel (Pack of 10)

Specification:
MOC : Polypropylene
Filter Size : 47mm
Funnel Capacity: 100ml & 250ml

Gamma Sterilization Packing

DMF100 – Disposable M-Funnel 100 ml

Nylon , CN, PTFE , PVDF  Material Established in the year 2007, A One Engineering Works is one of the leading manufacturer, trader and exporter engrossed in offering a wide variety of products such as Sterility Testing Manifold System, Membrane Filter Holder, Syringe Filter, Industrial Rota Meter, Lab Furniture, Storage Tanks, Silicon And Gaskets Products, Filter Holder, Level Sensor, Water Testing Equipments, HPLC Consumable, GC Consumable, Laboratory Equipments, Disposable Funnel, Sterility Test Apparatus, Rubber Stoppers and many more products.

Product sellpoints

• Wide Application in Laboratory:Ideal for use in laboratory settings, these filters are designed for microppose tubes filtration.
• Easy to Use:Designed for ease of use, these filters are perfect for water filter businesses and DIY enthusiasts.
• Acetate Cellulose Material:Constructed from high-quality Acetate cellulose, these filters are durable and resistant to chemicals.
• Versatile Diameter Options:Available in multiple diameters (13/25/47/50/100/150mm) to fit various lab equipment and whole apartment water filter systems.
• Microporous MCE Membrane:Features a Microporous MCE membrane for efficient water filtration, ensuring clean and pure water.

The round filter paper specifications are classified by diameter with 9cm, 11cm, 12.5cm, 15cm, and 18cm. As for the specification of square papers, there are 60cm x 60cm and 30cm x 30cm. Filter paper is a porous material used for various filtration applications in laboratories and industrial processes.