Multistage Pressure Pump
Micro Vacc_3 Triple Head Pump Laboratory vacuum pump - for filtration / oil-free
Minimum Order Quantity: 2 Set
|Discharge Range||10-40 LPM|
|Model Name/Number||Micro Vacc_3|
|Max Flow Rate||5LPM|
|Discharge Pressure||1 BAR|
How AE-SPE12 composed and it’s advantages:
One panel with 12 holes.
One flexy glass chamber ( size: 270 x90 x 160 mm).
Collecting test tube rack (1pcs).
One joint (with a vacuum control valve).
The number of holes and spacing: 12 holes, 24 mm spacing is relatively spare, easy to connect the large volume storage pool.
Flow control: independent quark and stainless steel channel, rare consumption, good flow consistency. High Quark position, easy to operate.
The exhaust port in the upper end of the cylinder body, bottom hole for discharge of waste water which is very convenient.
Row rank: front and rear at three-dimensional cross arrangement, easy to observe the flow at rear row. The rear position is designed 10mm higher, for better observe the rear column.
This patent design is inspired by taking picture for group team, if people not standing on the steps at rear row, it is difficult to show his face. SPE HAMAG 19L design the rear row 10mm higher, front and rear row cross arrangement, the back of each channel in the centre of the front row position, so front and rear interchange, as the group photo, allowing users to observe every channel flow situation as much as possible, unlike the traditional solid-phase extraction apparatus which cannot be viewed from the front to the back flow and hard to avoid liquid confusion.
Compared to 19 holes SPE, the 24 holes solid-phase extraction apparatus doesn’t have enough between the holes, when connected in series with a large volume of a syringe or a filter, enough space is needed, so as to prevent syringes be crowded together. This product adopts stainless steel channel, durable, low consumption, pumping liquid discharge port with Teflon anticorrosive material.
This product including vacuum gauge and vacuum control valve, very convenient to discharge the waste liquid, waste liquid cylinder won’t be needed, liquid is pumped into the transition bottle,a transition bottle with a valve, after completion of the experiment, open the valve and waste liquid can be discharged to the designated place, greatly reduce the harm of organic solvents to the operate people.
Same series products including:
AE-SPE12 SPE for 12 holes
- Production Capacity: 50 PIC
- Delivery Time: 1-2 WEEK