Call 08048980649 83% Response Rate

Send Email

Pressure Filter Holder

This 47mm in-line holder (Model IFH47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The back-pressure support screen protects the filter from rupture during reverse pressure surges. Upstream vent enables venting at any time during filtration. Dual sealing system compresses filter to ensure no lateral wicking / leaking.

Locking ring enables filter changes without disconnecting from lines. Unit comes standard with silicone o-ring and FPM vent o-ring. When filtering gases, it is recommended that a second support screen be used upstream of membrane. Replacement parts and alternate o-ring materials are available.

Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm

Inline Filter Holder 47 Mm

Product Price: Rs 11,200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
BrandAONE
ModelIFH_P47
Capacity50 ML DEAD VOLUME
ApplicationSterilize and ultraclean liquids and gases under positive pressure. Sterilize with membrane in place
Powerair pressure
TypeHigh Pressure
Country of OriginMade in India

The 47 mm filter holders are designed for in-line

liquid or gas filtration. They open and close easily

without disturbing the filter disc. Used for in-line

removal of particles or microbial contaminants from

liquid and gases. Tubing connectors accept 9.5 mm I.D.

Tubing and can be replaced by a SS Nut  fitting to be

used with a syringe.

Autoclavable  121 @15 minutes 

 

Open Faced Filter Holder is used for sampling

of air (aerosols) environment. Unit can be used for

vaccum  and pressure filtration only.

Tubing connector accepts 9.5 mm ID tubing.



Additional Information:

  • Item Code: AE3214
  • Production Capacity: 100 pic
  • Delivery Time: 1 week
  • Packaging Details: box packing
Get Best QuoteRequest A Callback
Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm
  • Inline Filter Holder 47 Mm

Inline Filter Holder 47 Mm

Product Price: Rs 8,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Brandaone
ModelIFH47
Capacity300 ml
ApplicationDesigned for in-line liquid or gas filtration. Durabl construction for Viscus sampling. Capable of c
PowerN2 Pressure Required
TypeTC type
Country of OriginMade in India

Description

High Quality, Corrosion-Resistant Holders for viscus Sampling

  • Stainless steel construction offers excellent chemical resistance.
  • Holders open and close easily. Filter remains undisturbed for particulate analysis.
  • Upstream threaded vent on 47 mm holder allows release of trapped gas during liquid filtration.
  • Convenient in-line opening and closing capability.

Specifications

25 , 47 mm In-line Stainless Steel Holder with TC Clamp

Materials of Construction

  • Body, Underdrain Disc, and Support Screen: Type 316 stainless steel
  • Hose Barb Adapters: Nylon
  • Center Ring Collar: Type 303 stainless steel
  • O-ring: Viton

Effective Filtration Area

  • 3.7 cm2

Dimensions

  • Overall Length (Excluding Hose Barb): 4.0 cm (1.6 in.)
  • Diameter: 3.7 cm (1.5 in.)

Inlet/Outlet Connections

  • 18 in. FNPT; hose barb adapters accept 6.4 mm (14 in.)
  • ID tubing

Maximum Operating Temperature

  • Limited by filter type or by Viton O-ring 204 °C (399 °F) or by Nylon adapter 121 °C (250 °F)

Maximum Operating Pressure

  • 14 bar (1400 kPa, 200 psi)

Sterilization

  • Provided non-sterile; autoclavable at 121 to 123 °C (250 to 253 °F) at 1.0 bar (100 kPa, 15 psi) for 15 to 20 minutes.



47 mm In-line Stainless Steel

Materials of Construction

  • Body: Type 316 stainless steel
  • Hose Barb Adapters: Polyethylene
  • Support Screen and Underdrain Disc: Electropolished type 316 stainless steel
  • O-Ring: Viton
  • Thrust Ring: PTFE
  • Center Ring Collar: Type 303 stainless steel

Effective Filtration Area

  • 9.6 cm2

Dimensions

  • Overall Length (Excluding Hose Barb): 5.7 cm (2.2 in.)
  • Diameter: 5.9 cm (2.3 in.)

Inlet/Outlet Connections

  • 38 in. FNPT; hose barb adapters accept 6.4 mm (14 in.) ID tubing

Maximum Operating Temperature

  • Limited by filter type or by hose barb 93 °C (199 °F)

Maximum Operating Pressure

  • 14 bar (1400 kPa, 200 psi)

Sterilization

  • Provided non-sterile; autoclavable at 121 to 123 °C (250 to 253 °F) at 1.0 bar (100 kPa, 15 psi) for 15 to 20 minutes.

Applications

  • Designed for in-line liquid or gas filtration.
  • Durable construction for stack sampling.


Additional Information:

  • Production Capacity: 5000
  • Delivery Time: 1day
  • Packaging Details: box, wooden as per order
Get Best QuoteRequest A Callback
Inline Filter Holder 47 Mm for laboratory
  • Inline Filter Holder 47 Mm for laboratory
  • Inline Filter Holder 47 Mm for laboratory

Inline Filter Holder 47 Mm for laboratory

Product Price: Rs 12,500 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Brochure

Product Details:
Usage/ApplicationLaboratory
BrandA One Engineering Works
MaterialStainless Steel
Filter Diameter47 mm
Material GradeSS304, SS316
Surface FinishPolished

This 47mm in-line holder (Model IFH47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents the sticking of the membrane during autoclaving. The back-pressure support screen protects the filter from rupture during reverse pressure surges. Upstream vent enables venting at any time during filtration. The dual sealing system compresses filter to ensure no lateral wicking/leaking. The locking ring enables filter changes without disconnecting from lines. Unit comes standard with silicone o-ring and FPM vent o-ring. When filtering gases, it is recommended that a second support screen be used upstream of the membrane. Replacement parts and alternate o-ring materials are available.

Applications:

  • Sterilize and ultraclean liquids and gases under positive pressure. Sterilize with membrane in place for microbiological studies.
  • Install for point-of-use filtration on filling machines. General particulate analysis
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© A One Engineering Works. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.