- Home
- »
- Our Products
- »
- Water Testing Equipments
Water Testing Equipments
Silt density index(SDI) test is the major test method to determine the effectiveness of a pre-treatment process to reduce the fouling tendency of feed water. This product consisting of pure mixed cellulose esters(MCE) is specially designed for SDI test.
Features
Pure MCE without support
Extremely uniform pores
Consistent performance and lot traceability
Reference to ASTM standard D 4189-07
Disposable Filter Funnels Sterilised
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | AONE |
Material | Plastic |
Capacity | 100 ML |
Mouth Diameter | 47 MM |
Usage/Application | Chemical Laboratory |
Color | Transparent |
Size | 47 mm |
Hole Diameter Mm | 55 mm |
Description
Disposable Filter Funnel, Sterile, 100 ml, Gridded, White,MCN 0.45 Micron, 100/pk
Applications
Microbiological analysis of:
- Wastewater
- Potable water
- Beer and wine
- Waste water
- Dairy products
- Soft drinks
Features and benefits
- Rapid testing: With no need to sterilize funnels or filter base between samples, testing time can be reduced by up to 80%
- No flaming required: Combined filtration unit minimizes the risk of cross-contamination
- All-in-one system: Filtration unit easily converts to a Petri dish, which can be labeled and incubated for culturing
- Reduced contamination: Single-use materials virtually eliminate cross-contamination between funnel and membrane
- Reproducible results: All-in-one filtration unit reduces the chance of external error
- Easy handling: Ready-to-use, pre-sterilized monitors are simple to use
Additional Information:
- Production Capacity: 200000
- Delivery Time: 1-2 week
- Packaging Details: box
Density Index Test Kit
Minimum Order Quantity: 2 Piece
Brand | A One |
Filter Diameter | 47 mm |
Material | Stainless Steel |
Material Grade | SS 316 |
Filter Membrane | 0.45 um |
Pressure | 30 psi |
SS 316 SDI Test Kit
Minimum Order Quantity: 2 Unit
Material | Stainless Steel |
Model Number/Name | 321545 |
Usage/Application | Laboratory |
Packaging Type | Box |
Brand | A One |
Grade | Manual |
Power | 230 AC |
Size/Dimension | 47 mm |
Voltage | 230 VAC |
Phase | 1 Phase |
Silt density index(SDI) test is the major test method to determine the effectiveness of a pre-treatment process to reduce the fouling tendency of feed water. This product consisting of pure mixed cellulose esters(MCE) is specially designed for SDI test.
Features:
- Pure MCE without support
- Extremely uniform pores
- Consistent performance and lot traceability
- Reference to ASTM standard D 4189-07
Silt Density Index Test Kit
Minimum Order Quantity: 2 KIT
Packaging Type | Box |
Usage/Application | Checking Slit Density Index Of Water |
Type | Compact |
Material | Steel |
Number Of Tests | 50 depend on use |
Filter Holder | 47 mm |
Filter Material | SS 316 |
Filter Papers | 45 micro m, 47 mm |
SDI test kit is a compact, lightweight unit suitable for monitoring Silt Density Index. Additionally, its portability makes it ideal for troubleshooting and routine monitoring of multiple Lab, Industrial RO Water systems.
Manual SDI test kit contents:
- Pressure Gauge & Pressure Regulator
- On /Off Valve
- Stopwatch
- Measuring Beaker 500
- Forceps SS
- With Box
- Manual
Typically, In this Test Kit, spiral-wound reverse osmosis systems will need an SDI less than 5, and hollow fiber reverse osmosis systems will need an SDI less than 3. In these Systems, deep-well waters could be used straight from the source. The water will need to be filtered before use If it is fed from surface waters (with a typical SDI greater than 6).
It is a measurement of the fouling potential of suspended solids. It’s not measuring the quantity of a particular matter. Turbidity is used for a measurement of the number of suspended solids. They are not the same and there is no direct correlation between them.
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: Mumbai
- Production Capacity: 500
- Delivery Time: Available
HPLC Sample Filtration Test Kit
Packaging Type | Box |
Usage/Application | Laboratory |
SS Filter Holder Size | 13, 25 mm |
Needle | HPLC |
Gas Tight Syringe | 5, 10 ml |
Membrane Filter | 13 mm x 0.2 micro (Pk. of 100 Nos.) |
Membrane Filter Material | Nylon 66 |
Available Filter Size - 13 mm , 25 mm, 47 mm
Silt Density Index (SDI) Test Test Kit Complete
Packaging Type | Plastic Box |
Usage/Application | Water SDI Value Cheking |
Type | Analog |
Pressure | 30 psi |
Brand | A One |
Country of Origin | Made in India |
Support Screen | 47 mm |
Reckoned as a leading business name, we are actively betrothed in delivering to our clients highly efficient SDI Filtration Kit.
Features:
- Best Accuracy
- Compact design
- Fungal Resistance
- Compact design
Including accessories:
- SS filter holder
- SS supposed screen
- Pressure gauge with precious regulator
- Valves & required fitting, tube, push fitting
- Membrane filter paper 0.45um x47 pkt/100
- Case bag (for handling)
- Manual
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
SDI Booster Pump Kit
Minimum Order Quantity: 1 PIC
Model Name/Number | SDI 10B |
Usage/Application | Industrial |
Pump Type | Booster Pump |
Brand | A One |
Pressure | 10 Bar |
Power Source | Electric |
Phase | Single Phase |
Voltage | 220 VAC |
Frequency | 50/60 Hz |
Connector | 8 mm PU Tube |
SDI test kit is a compact, light weight unit suitable for monitoring Silt Density Index. Additionally, its portability makes it ideal for troubleshooting and routine monitoring of multiple Labs, Industrial RO Water systems.
Booster Pump kit contents.
- Pressure Gauge & Pressure Regulator
- With Case Box
Additional Information:
- Production Capacity: 500 / MONTH