- Home
- ยป
- Our Products
- »
- Laboratory Filtration
Laboratory Filtration
Sterility Test Manifold System with 6 stations is an integrated filtration system having a prime application in filtering multiple samples off one vacuum source. It is without filter holders. It is perfectly supported on stainless steel manifold with rugged side supports which keeps the system rigid and firm even while fully loaded Use For West Water, Cosmetics, Pharmaceutical Products Analysis, Bio burden Testing, Water Monitoring Sterility Testing.
Mobile Phase Filtration Assembly (HPLC)
Minimum Order Quantity: 3 Kit
Product Brochure
Usage/Application | Laboratory |
Diameter | 47 mm |
Capacity | 300 ml |
Material | Borosilicate Glass & SS316 |
Brand | A One |
Funnel Capacity mL | 300 ml Flask 1 Ltr. apprrox |
Includes:
250 mL glass / SS Funnel
1000 mL flask
Clamp
Stainless steel holder and screen
1 gaskets
100 Nylon 66 filters (47 mm, 0.45 μm pores)
Oil Free Vacuum Pump and Silicon tube
Features
* It is convenient to filtrate several samples at the same time.
* 316L stainless steel holder, corrosion resistance, acid and alkali resistance.
* Each holder has individual control valve, so one vacuum pump can support operations of single and multi-branch manifold filter.
* It can be widely used in chemistry analysis, pharmaceutical , sanitation test , water quality analysis, science research fields and so on.
Capsule Filtration System
Minimum Order Quantity: 1 Piece
Product Brochure
Capacity | Upto 20 ltr. |
Automation Grade | Manual |
Material | Stainless Steel |
Brand | A One Engineering Works |
Filter Volumes Ranging | 500 ml to 20 liters |
Surface Finish | Polished |
MNPT Inlet | 1/4 inch |
Material Grade | SS316 |
Application :
Compact design
Wide chemical compatibility
All components are of SS316L stainless steel
No polymeric tubing is used
Filters offered are Nylon-66 membrane capsule filters type DNL
Component :
SS316L, 5 liter Pressure Vessel with vent – valve and a special extended outlet connection to fit capsules with 1/4″ MNPT Inlet.
Specification :
Very high flow rates (1-5lpm) resulting in much reduced filtration time even with 0.2μm capsule filters
Very low hold-up volume helps minimize loss of expensive drug solutions
Occupies very less laboratory space due to its compact design
Additional Information:
- Production Capacity: 50 LTR
- Delivery Time: ex stock
- Packaging Details: Box
Vacuum Filtration (Suction) Buchner Funnel
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Aone |
Material | Borosilicate Glass |
Capacity | 500 ml funnel capacity , Receiver 2000ml |
Mouth Diameter | CUSTOMISED |
Usage/Application | Chemical Laboratory |
300mm height, make -aone | 20kg |
Buchner funnels are used in the laboratory for vacuum-assisted liquid filtering. In organic chemistry, these funnels are used to collect recrystallized compounds because they help remove moisture from the final product.
Buchner funnels consist of an open straight-sided cylindrical chamber that narrows to a tube- or pipe-shaped opening. The tube-like extension can be placed through a stopper, which is then placed into the top of a filtration or Buchner flask. Plastic versions may have a bung hole located at the side of the chamber to which a vacuum may be attached. Buchner funnels are reusable.
The bottom of the Buchner funnel chamber may be perforated or contain a separate fritted disc. Filter paper is used for Buchner funnels with perforated lower surfaces. Place the filter paper of the preferred porosity inside the chamber, pre-wet, add the liquid, and apply the vacuum.
Funnels with fritted glass discs do not require filter paper. The fritted glass will be porosity-rated as fine, coarse, medium, etc. Filtration with a Buchner funnel proceeds more quickly than letting the liquid flow simply using gravity. Most Buchner funnels are also rated for a maximum vacuum pressure.
- Material Porcelain
- Autoclavable Yes
- For Use With (Application)Suction filtration
- applications Includes Fixed perforated plate
- Product Type Buchner Funnel
- Buchner funnel size - 50 mm, 100 mm, 150 mm , 200 mm , 300mm
- Glass Reciver - 1000 ml, 2000 ml, 5000ml , 10000ml (Customised)
- Oil Free Vacuum AE_50 with Vcauum Gauge With Filter regulator
- Grade 41 Filter Paper pkt/ 100
Additional Information:
- Item Code: 78545
- Production Capacity: 500
- Delivery Time: 1 week
- Packaging Details: box
Filtration System For Solvent
Minimum Order Quantity: 2 Piece
Product Brochure
Capacity | 500 ml |
Phase | Single Phase |
Brand | A One |
Frequency | 50 Hz |
Material | Stainless Steel |
Voltage | 230 V |
Applications :
Filtration for microbiology test
Chemical experiment
General laboratory filtration
Quick-assembly and disassembly
Each component can be removed easily by hand for cleaning and autoclaving to prevent biofilms and eliminates sources
of contamination.
Convertible funnel adaptor
Convertible funnel adaptor design allows user to fit their desired funnel (reusable or disposable) easily.
Innovative vent valve design
An adjustable vent valve integrated with the pipe can eliminate water hammer phenomenon and help drain out residual waste water.
Additional Information:
- Item Code: 3930215
HPLC Filtration Assembly
Minimum Order Quantity: 2 Piece
Material | Stainless Steel |
Brand | A One |
Application | Chemical Laboratory |
Surface Finish | Mirror Finish |
Features | User Friendly |
Size (mm) | 47 mm |
Capacity | 300 ml |
Country of Origin | Made in India |
Membrane Filter 47 mm/0.45 µm Pack of 100 | One Pack |
Vacuum Flask one litre Borosil /Schott | One |
Vacuum Pump diagphram type oil free | One |
Air Vent Filter Hydrophobic PTFE 50 mm/0.2μm | One |
Syringe type PTFE Membrane Filter 25 mm/0.45 µm with needle | One |
Flexible Tubing 1Mtr. | One |
Plastic Tweezers (forceps) | Two |
Additional Information:
- Item Code: R2
Air Vent Filter,PTFE,02/50
Minimum Order Quantity: 1 Pack
Product Brochure
Brand | A One |
Usage/Application | Laboratory |
Medium Material | Active Carbon, Microfiber |
Filtration Grade | Pre Filter |
Packaging Type | Box |
Support Housing | PP |
Sealing Technology | Thermal Bonding,No Adhesives |
Filter Media | Nylon66/PTFE/PP/PVDF |
Support Housing | PP |
Sealing technology | Thermal Bonding, No Adhesives |
Dimensions | |
Outer Diameter | Nylon66/PP/GF/PVDF |
Inlet/Outlet | 7~13 mm stepped hose barb connection with 12x 9 |
Filtration Area, ft2 | |
≥ 0.021 | |
Pore Size, μm | |
Please refer to Ordering Information. | |
Maximum Operating Pressure | |
Forward: 3.5 bar @ 23°C and 3.0 bar @ 60°C for liquid; 3.0 bar @ 23°C and 2.5 bar @ 60°C for air gas. |
Vacuum Trap System
Minimum Order Quantity: 2 pic
Product Brochure
Capacity | 2-5 L |
Warranty | 12 MONTH |
Material | LDPE / PP |
Color | WHITE |
Vacuum trap | 1000 ML , 2000 ML , 4000 ML |
Normal pressure | -760 MMHG |
Finishing Type | MATT |
Other details | NO |
Flow Rate | 0-10 LPH |
Dimensions | 300 X 200X 120 MM |
Usage | For Vacuum Aspiration , Filtration |
Thickness | 4 MM |
Country of Origin | Made in India |
- Comes ready-to-use, no assembly required
- Shatterproof bottles offer improved safety
- VersaCap eliminates tube tangling
- Easy to empty without detaching tubing
- Inline hydrophobic filter included
- Optional ultra-stable secondary container
- Optional overflow bottle for CDC compliance
Ideal for protecting vacuum lines and users, Vacutrap safely contains waste produced during supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all, Vacutrap comes ready to use, and fully assembled. Simply attach to your vacuum source and begin your experiment.
Vacutrap is available as a one- or two-bottle complete system with safety bin, or as a one-bottle assembly without a bin. For the ultimate performance, the two-bottle system with bin is recommended. Offering 3l of total storage, this option's second bottle offers the greatest safety assurance and overflow prevention.
Accessories information: Vacutrap Tubing Extensions allow users to extend their vacuum tubing up to 8 feet. Alternatively, a 50' roll of Vactrap tubing can be purchased and cut to length. And for users who love the Vactrap Bin, additional bins can be purchased separately.
Caution: Do not autoclave Safety Bin. Do not autoclave HDPE bottles. Always consult chemical compatibility charts or other reference materials before exposing plastics to organics or solvents.
Additional Information:
- Production Capacity: 1000 PER MONTH
- Delivery Time: EX STOCK
- Packaging Details: CORROGETED
Disposable Filter Funnels Sterile
Usage/Application | Water Testing, Microbiology |
Brand | A One |
Material | Stainless Steel, PP |
Shape | Round |
Capacity | 125 ml |
Temperature Range | 120d @15 minuts |
Automation Type | Semi-Automatic |
Country of Origin | Made in India |
Increase Laboratory Efficiency with Ready-To-Use Disposable Filter Funnels
Each lot is certified for microbiological analysis to provide added assurance of reliable results.
Easy-to-use. Unique squeeze separation of cylinder from base allows easy access to membrane.
- Individually bagged, Disposable filter units prevent cross-contamination of samples
- Available in 125 mL capacity to process larger samples
Allows easy and accurate sample measurement. The 100 mL Funnels are marked in 10 mL increments. The 100 mL increment is marked completely around the funnel for higher visibility. The 300 mL funnel is marked in 50 mL increments
Ready to use. Pre-assembled and gamma-irradiated to eliminate the potential for toxic extractables associated with EtO sterilization.
Variety of options. Choose from Gridded membrane in 0.45 μm pore size, membrane with 0.45 μm pore size.
Features and Benefits:
- Disposable design eliminates dedicated glassware, ideal for radioactive app.
PVDF Filter Cartridge
Micron Ratings | 0.45 Micron |
Length | 10 Inch |
Diameter | 2 Inch |
Applications | Pharmaceutical / Biological, Chemical Process, Beverages/Alcohol |
Maximum Operating Temperature | 82 Deg. C |
5",10" | 50mm dia |