- Home
- ยป
- Our Products
- »
- Syringe Filter
Syringe Filter
Tisch nylon syringe filters provide a universal application for analytical procedures. Naturally hydrophilic, high protein binding and high dirt loading capability, and good chemical resistance make them ideal for aqueous (non-acidic) or organic sample preparations, HPLC, GC or dissolution sample analysis.
Sample Filtration Kit
Minimum Order Quantity: 1 Piece
Product Brochure
Usage/Application | Industrial |
Size | 13 mm SS Filter Holder |
Brand | A One Engineering Works |
Needle | HPLC |
Application | Laboratory Use |
Syringe | 5 ml Gas Tight |
Membrane Types Applications:
Nylon 66
- hydrophilic membrane
- filtration rate: fast
- strong protein binding capacity
- solvent compatibility: “weak” organic solvents (alcohols, acetonitrile), aqueous solutions, base solutions, THF
- not recommended for: strong acids, halogenated hydrocarbons
- use: for general filtration and filtration of HPLC samples
PTFE (Teflone)
- hydrophobic membrane
- filtration rate: medium
- low dissolution, best solvent resistance
- solvent compatibility: “strong” organic solvents, strong acids, strong alkalis, chlorinated hydrocarbons
- not recommended for: aqueous solutions
- use: for organic solvents, general filtration and filtration of HPLC samples
M. E. Cellulose (mixed cellulose ester, nitrate and acetate)
- hydrophilic membrane
- filtration rate: medium
- solvent compatibility: aqueous solutions, ”weak” base solutions, hydrocarbons
- not recommended for: ”strong” organic solvents, strong acids, strong bases
- used for the filtration of aqueous solutions, biological samples and HPLC samples
Component:
- 13mm S. S.316 Filter Holder
- HPLC Needle
- 5ml Gas Tight Syringe
- Nylon 66 Membrane Filter13mm x 0.2μ (Pk. of 100 Nos.)
Ss Syringe Filter Holder
Product Brochure
Usage/Application | Filtration |
Material | Stainless Steel |
Brand | A One |
Length | 0-5" |
Size | 13 mm |
Usage | Air Filter |
Diameter | 0-1" |
Max Inlet Temperature | 121 Deg C |
Max Working Pressure | 2 Bar |
Automation Grade | Manual |
Gasket | Silicon |
- Guarantees leak-proof sealing of the hose nipple and the holder without sealing rings
- Other connectors fit the holder onto reducing valves or pumps or onto pressure tanks
- Special polished surfaces allow easy cleaning and rinsing
- Sturdy stainless steel has a long lifecycle and is compatible with aggressive materials
- For use with 25mm membrane filters (20mm prefilter for liquid filtration)
- Sterilize by autoclave (max 134°C) or by dry heat (max 180°C)
- Weight; 170g
Additional Information:
- Item Code: SSF13
- Production Capacity: 5 Ml
- Delivery Time: Ready Stock
Sterile Syringe Filter
Minimum Order Quantity: 50 Pack
Product Brochure
Usage/Application | Laboratory |
Brand | A One Engineering Works |
Effective Filtration Area | 2.89 cm2 |
Packaging Type | Box |
Holdup Volume | 30 ul |
Volume Throughput | 100 ml |
Maximum Operating Temp | 100 Deg C |
Bubble Point | 30 psi |
Housing Material | Polypropylene |
Membrane Material And Pore Size | Nylon 0.45 um |
Wettability | Hydrophilic |
Inlet/Outlet | Female luer lock/Male luersilp |
| PVDF | PES | NYLON | PTFE |
Membrane material and Pore size | PVDF 0.45µm | PES 0.45µm | Nylon 0.45µm | PTFE 0.22µm |
Wettability | Hydrophobic | Hydrophilic | Hydrophilic | Hydrophobic |
Housing Material | Polypropylene | Polypropylene | Polypropylene | Polypropylene |
Inlet/Outlet | Female luer lock/Male luersilp | Female luer lock/Male luersilp | Female luer lock/Male luersilp | Female luer lock/Male luersilp |
Maximum Operating Temp(°C) | 100 | 50 | 100 | 130 |
Filtration area(cm2) | 2.89 | 2.89 | 2.89 | 0.92 |
Holdup volume (μl) | 30 | 100 | 30 | 10 |
Volume Throughput (ml) | 100 | 100 | 100 | 12 |
Bubble point(psi) | 10 | 44.9 | 30 | 18 |
Ss Syringe Filter Holder,13,25mm
Minimum Order Quantity: 10 Piece
Product Brochure
Usage/Application | Laboratory |
Brand | A One |
Material | Stainless Steel |
Lock Fitting Type | Lure |
Filtration Area | 3.8 cm2 |
Material Grade | SS316 |
Filter Size | 13 mm |
Features:
- Syringe Filter made of SS-304 or SS-316 with chrome plated
- Lure spin fitting to attached manifold vent port easy
- Fine knurling for easy tightening
Applications:
- Use for filter or cleaning small volumes of liquid as eyewash or photoresist.
- Purity virus solutions.
- Clarifying turbid solutions.
- For HAPLY applications and solvents.
Stainless Steel Syringe Filter Holder13,25mm
Minimum Order Quantity: 20 Piece
Product Brochure
Brand | A One Engineering Works |
Material | Stainless Steel / Polypropylene |
Filtration Area | 3.8 cm2 |
Ring | Silicon |
Pressure Inlet | 90 SSI |
Gasket | PETE |
Inlet | Female Lure lock |
Differential | 40 SSI |
Lock Fitting Type | Lure |
Material Grade | SS316 |
Filter Size | 13 mm |
Pressure | 90 SSI |
Outlet | Male Lure Slip |
We manufacture Syringe Filter Holder. It is known for its quality among all our buyers. Owing to their ruggedness and seamless finish, these are broadly recommended.
Features:
- Syringe Filter made of SS-304 or SS-316 with chrome plated.
- Lure spin fitting to attach manifold vent port easy.
- Fine knurling for easy tightening.
Application:
- Use for filter or cleaning small volumes of liquid as eye wash or photo resists.
- Purity virus solutions.
- Clarifying turbid solutions.
- For HPLC applications and solvents.
13 Mm Syringe Filter Holder
Minimum Order Quantity: 10 Piece
Product Brochure
Usage/Application | Laboratory |
Shape | Round |
Capacity (ml) | 10 ml |
Pressure (psi) | 50 psi |
Diameter (mm) | 13,25 mm |
Brand | A One |
Size (mm) | 13 mm, 25 mm |
Material | SS316, PP, PTFE |
Gas Micron Fillter
Minimum Order Quantity: 5 Piece
Product Brochure
Usage/Application | Gas |
Brand | A-One |
Length | 5-10 inch |
Finishing | Polish |
Material | Stainless Steel |
Size | 2/4 inch |
Material Grade | SS 304 L |
Packaging Type | Box |
Country of Origin | Made in India |