- Home
- »
- Our Products
- »
- Vacuum Manifold
Vacuum Manifold
SPE 24 Ports Vacuum Manifold
Minimum Order Quantity: 1 Set
Product Brochure
Usage/Application | Solid phase Extraction |
Brand | A One |
Material | Plastic |
Model Number | AESPE, AESPE12, SPEC-4000 |
Shape | Rectangular |
Capacity | 24 Port |
Temperature Range | 50 Deg C |
Color | Clear Glass |
Shelves | 4 |
Guide Needles | 12 |
Lure Plugs | 12 |
Gasket | Silicon |
- One panel with 12 holes.
- One glass cylinder (cylinder size: 270 x90 x 160 mm).
- Collecting test tube rack (1pcs).
- One joint (with a vacuum control valve).
- The number of holes and spacing: 12 holes, 24 mm spacing is relatively spare, easy to connect the large volume storage pool.
- Flow control: independent quark and stainless steel channel, rare consumption, good flow consistency. High Quark position, easy to operate.
- The exhaust port in the upper end of the cylinder body, bottom hole for discharge of waste water which is very convenient.
- Row rank: front and rear at three-dimensional cross arrangement, easy to observe the flow at rear row. The rear position is designed 10mm higher, for better observe the rear column.
Design story:
This patent design is inspired by taking picture for group team, if people not standing on the steps at rear row, it is difficult to show his face. SPE HAMAG 19L design the rear row 10mm higher, front and rear row cross arrangement, the back of each channel in the centre of the front row position, so front and rear interchange, as the group photo, allowing users to observe every channel flow situation as much as possible, unlike the traditional solid-phase extraction apparatus which cannot be viewed from the front to the back flow and hard to avoid liquid confusion.
Compared to 19 holes SPE, the 24 holes solid-phase extraction apparatus doesn’t have enough between the holes, when connected in series with a large volume of a syringe or a filter, enough space is needed, so as to prevent syringes be crowded together. This product adopts stainless steel channel, durable, low consumption, pumping liquid discharge port with Teflon anticorrosive material.
This product including vacuum gauge and vacuum control valve, very convenient to discharge the waste liquid, waste liquid cylinder won’t be needed, liquid is pumped into the transition bottle,a transition bottle with a valve, after completion of the experiment, open the valve and waste liquid can be discharged to the designated place, greatly reduce the harm of organic solvents to the operate people.
Same series products including:
- AE-SPE12 SPE for 12 holes
Additional Information:
- Item Code: AESPE
- Production Capacity: 1000 Per month
- Delivery Time: 1-2 week
- Packaging Details: corrugated
SPE Cartridge Vacuum Manifold For Solid Phase Extraction
Minimum Order Quantity: 2 No
Usage/Application | Solid phase Extraction |
Brand | Aone |
Material | Polypropoleane |
Model Name/Number | SPEC12 |
Shape | Rectangular |
Capacity | 12/24/96 Port |
Temperature Range | 50 Deg C |
Features | 12-24 Positions SPE Vacuum Manifold Complete Set Run multiple samples simultaneously, with a control |
Automation Type | Semi-Automatic |
Country of Origin | Made in India |
- PUSH-type valves within each SPE port for precise flow control
- Glass basin will not dissolve, fog, or discolor when exposed to solvents
- Legs on cover allow user to easily rest cover on work surface when removed from the manifold
- PUSH Leur-type solvent-resistant vacuum bleed gauge and valve offer better sealing and vacuum control. Valve takes 1/4″ vacuum tubing.
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
- Production Capacity: 100 / Month
- Delivery Time: 1-2 week
- Packaging Details: Corrugated Box
Solid Phase Extraction Vacuum Manifold
Minimum Order Quantity: 2 Box
Brand | A One |
Industry Type | Commercial |
Capacity | 12 port, 24 port, 48 port |
Material | PTFE |
Pressure | -550 mm hg |
Usage/Application | Solid Phase Extraction |
SPE Vacuum Manifold, Solid Phase Extraction, 12 , 24 , 48 Port
Usage/Application | Solid Phase Extraction |
Brand | A One Engineering Works |
Material | PolyPropoleane |
Model Name/Number | SPE 12 |
Shape | Rectangular |
Temperature Range | 60 Deg C |
Color | White |
Available Port | 12,18,24 |
Product Description:
- Rectangular Acrylic Cabinet
- Polypropylene Lid
2 Sizes Available:
- Small For Up To 12 Columns Cartridges
- Large For Up To 12 Columns Or Up To 24 Cartridges
Available Port: 12, 18, 24.
Specifications:
- Vacuum Gauge For Pressure Reading
- Control Valve For Adjustment Of Vacuum
- Replaceable Valves For Vacuum Control Of Individual SPE Columns
- Variable Rack with Exchangeable Partitions, Which Accept A Wide Variety Of Vessels Like Test Tubes, Measuring Flasks, Scintillation Vials, Autosampler Vials, Plastic Vials Etc.
- 20um Columns With 5-10 Ml Sample Reservoir For Medium Size Samples
- Polypropylene Sample Reservoir (5 Or 50 Ml Available)
- Adapter For Sample Reservoirs
- SPE Manifold Tubing Adapters
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Production Capacity: 500 PIC
- Delivery Time: 1-2 week
- Packaging Details: Box
Vacuum Filtration Manifold For Membrane Filtration
Minimum Order Quantity: 1 Unit
Usage/Application | water testing,Microbiology |
Brand | A-ONE |
Material | Stainless Steel |
Model Name/Number | MicroFil-47 |
Shape | Rectangular |
Capacity | 250 ml |
Temperature Range | 120d @15 minuts |
Product Description:
Vacuum Filtration Manifold is used primarily in microbiological, Sterility and analytical procedures that involve collecting a particulate (bacteria, precipitate, etc.) from a liquid suspension. They are particular designed and produced for several samples filtrate at the same time. Because each filter holder has individual control valve, only one set vacuum pump can sustain the single or Multi-branch manifold filter operate together.
- Two- and three-way valves feature PTFE stopcocks for smooth control
- Valves provide independent control at each branch for vacuum and venting
- Connect three or six filter holders to one Vacuum source
Specification :
- Material Of Manifold: Stainless Steel
- No of Branches: 1,3,6 With PTFE Valve
- Membrane Diameter: 47mm Effective Filtration Area: 13.5 Cm2.
- Supported Funnels: Polypropylene, SS-316, Borosilicate Glass, and PSU.
- Supported Volume Of SS Funnel: 300ml, 500ml, and 1000ml.
Additional Information:
- Item Code: MicroFil-47
- Production Capacity: 1000000 pic
- Delivery Time: 1-2 week
- Packaging Details: Wooden
Vacuum Manifolds 3-Places
Minimum Order Quantity: 2 Piece
Usage/Application | Laboratory |
Diameter | 47 mm |
Brand | A One |
Item Code | GMP3 |
Capacity | 300 ml |
Material | SS 316 / Borosilicate glass |
Stable base made of enamelled iron and with stainless steel braces with rubber protection. The equipment is designed with a distance between each place that facilitates the access and handling of the filter funnels. The vacuum manifold is made of borosilicate glass 3.3.
Each one of the place has a glass stopcock with 90° closing that allows to work independently in each station or in series. The outlet tube of the vacuum manifoldend is 10 mm diameter.
The filter holder is connected to the vacuum manifold by means of a rubber stopper. The connection of the funnel to the filter holder is adjusted with a clamp.
The reference includes 13 elements:
- 1 unit 3-place vacuum manifoldend with iron SS support
- 3 units 300 ml funnels; made glass of borosilicate 3.3
- 3 units filter holders for 47 mm diameter membrane filters; made glass of borosilicate 3.3
- 3 units ionised aluminium clamps
- 3 units bored silicone stoppers, 1 hole.
The vacuum manifold can be disassembled into parts with caution and proceed to its cleaning taking care not to expose the glass parts to sudden changes in temperature. Glass parts can be clear by autoclaved except for plastic and rubber parts.
The vacuum circuit is made by connecting the vacuum manifoldend to the vacuum pump by means of a rubber tube connected to the 10 mm diameter olive ramp. The 47 mm membrane filter must first be placed in each filter holder.
Vacuum Filtration Manifold, Sterility Test Manifold 1-3-6-Branch
Minimum Order Quantity: 1 Piece
Usage/Application | Microbiology |
Material | Stainless Steel |
Model | A-ONEST47XC |
Brand | AONE |
Filter Holder | Without |
Material Grade | SS 304 |
Number of Branches | 1,3,6 |
Finish | Polish |
Application | Laboratory |
SS Sterility Test Manifold System with 6 stations is an integrated filtration system having a prime application in filtering multiple samples off one vacuum source. It is without filter holders. It is perfectly supported on stainless steel manifold with rugged side supports which keeps the system rigid and firm even while fully loaded Use For West Water, Cosmetics, Pharmaceutical Products Analysis, Bio burden Testing, Water Monitoring Sterility Testing.
EZ-1 Vacuum Filtration Manifold
Product Brochure
Usage/Application | Laboratory |
Brand | A One |
Model Name/Number | EZ-1 |
Product Type | Water Testing Equipment, Biology Lab Equipment |
Supported Volume Of Funnel | 300 ml |
Membrane Diameter | 47 mm |
Filtration Area | 13.5 Cm2 |
Supported Funnels | Polypropylene,SS-316,Borosilicate Glass,and PSU |
No of Branches | 1 |
- Two- and three-way valves feature PTFE stopcocks for smooth control
- Valves provide independent control at each branch for vacuum and venting
- Connect three or six filter holders to one Vacuum source
Optional :
- Diaphragm Vacuum Pump
- Sterile Membrane
- Flame Sterilization Tool
- Tweezer
- Flask Fittings
Additional Information:
- Item Code: AVFM1
EZ-3 Vacuum Filtration Manifold
Product Brochure
Usage/Application | Laboratory |
Brand | A One |
Model Number | EZ-3 |
Membrane Diameter | 47 mm |
Supported Funnels | Polypropylene, SS-316, Borosilicate Glass, and PSU. |
Supported Volume Of Funnel | 500 ml |
No of Branches | 3 |
Filtration Area | 13.5 Cm2 |
- Two- and three-way valves feature PTFE stopcocks for smooth control
- Valves provide independent control at each branch for vacuum and venting
- Connect three or six filter holders to one Vacuum source.
Additional Information:
- Item Code: AVFM3
Manifolds Vacuum Filtration
Usage/Application | Laboratory |
Model Name/Number | GMP-6 |
Brand | A One |
Material | Stainless Steel |
Material Grade | SS 316 |
Capacity | 125 - 300 ml |
Membrane Pore Size | 0.45 um Grid Membrane |
No of Branches | 6 |
Filtration Area | 13.5 Cm2 |
Supported Funnels | Polypropylene |
Membrane Diameter | 47 mm |
Optional :
- Diaphragm Vacuum Pump
- Sterile Membrane
- Flame Sterilization Tool
- Tweezers
- Flask Fittings
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
HPLC Manifolds Vacuum Filtration
Brand | A One |
Filter Type | Suction Filters |
Usage/Application | Laboratory |
Material | Non Woven |
Membrane | Inbuid 0.45 um Edge Hydrophobic Cellulose Nitrate |
Capacity | 100 ml Funnel to 300 ml Bottom |
Packaging Type | Box |
Filter Holder Funnel has a convenient design with a detachable 100 ml funnel To 300 ML bottom for ease of sample collection and transfer to laboratory.
Inbuid 0.45μm Edge Hydrophobic Cellulose Nitrate membrane, to improve sensitivity and reliability by ensuring complete flushing of the drug sample, which is critical during bioburden testing of antibiotics and drugs containing bacteriostats.
GMP-1 Vacuum Filtration Manifold
Usage/Application | Laboratory |
Material | Stainless Steel |
Model Name/Number | GMP-1 |
No of Branches | 1 |
Membrane Diameter | 47 mm |
Filtration Area | 13.5 Cm2 |
Supported Funnels | Polypropylene |
Supported Volume Of Funnel | 125 - 300 ml |
Optional :
- Diaphragm Vacuum Pump
- Sterile Membrane
- Flame Sterilization Tool
- Tweezers
- Flask Fittings
GMP-3 Vacuum Filtration Manifold
Usage/Application | Laboratory |
Material | Stainless Steel |
Model Name/Number | GMP-3 |
No of Branches | 3 |
Membrane Diameter | 47 mm |
Filtration Area | 13.5 Cm2 |
Supported Funnels | Polypropylene |
Supported Volume Of Funnel | 125 - 300 ml |
Optional :
- Diaphragm Vacuum Pump
- Sterile Membrane
- Flame Sterilization Tool
- Tweezers
- Flask Fittings
Vacuum Filtration Manifold 6 Stage
Brand | A One |
Model Number | EZ-6 |
No of Branches | 6 |
Membrane Diameter | 47 mm |
Supported Funnels | Polypropylene, SS-316, Borosilicate Glass, and PSU |
Supported Volume Of Funnel | 1000 ml. |
Filtration Area | 13.5 Cm2 |
- Two- and three-way valves feature PTFE stopcocks for smooth control
- Valves provide independent control at each branch for vacuum and venting
- Connect three or six filter holders to one Vacuum source.
Additional Information:
- Item Code: AVFM6
Filtration Manifold
Minimum Order Quantity: 2 Box
Usage/Application | Laboratory |
Model | EZL3T |
Brand | A One |
Material | Stainless Steel |
Material Grade | SS316 |
No of Branches | 6 |
Details:
- Nonbreakable stainless steel unit may be flame sterilized to sanitize the holder between samplings
- Set pins and a locking nut on the funnel to help prevent twisting and tearing of the membrane
- Autoclavable with membrane in place
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
Sterility Testing Vacuum Manifold
Minimum Order Quantity: 1 Pack
Usage/Application | Dental |
Type Of Sterilizer | Steam Sterilizer |
Chamber Volume | 0-5 Litre |
Thread Size | 1/4 NPT |
Insulation Wall | Triple Wall |
Automation Grade | Manual |
Line Type | 2 Way |
Out Let | 8 x 13 Hose |
Material Grade | SS316 |
Valve Type | PTFE |
Material | Stainless Steel |
Additional Information:
- Item Code: 254784
- Production Capacity: 100000 / month
Vacuum Filtration Manifold
Minimum Order Quantity: 2 Unit
Usage/Application | For Sterility test |
Brand | A One |
Material | Stainless Steel |
Model Number | EZ6 |
Color | Silver |
Finishing Type | Polish |
No of Branches | 6 |
- Use Glass , plastic or stainless-steel filter holders fitted with standard No. 8 perforated stoppers over the holder outlets
- Manifolds connect to single vacuum source and use separate control valves at each station for independent operation
- Use vent ports on each stainless-steel manifold station to attach R1 ,R2 filter units to maintain sterility on the test filter's downstream side
Stainless-steel Manifolds:
- Stainless-steel body, three-way valves, filter holder supports; anodized aluminum handles; stainless-steel hose connector, pipe plug
- Units are autoclavable at 121°C (250°F)
Additional Information:
- Item Code: ez6
Solid Phase Extraction 96-Well Vacuum Manifold
Minimum Order Quantity: 1 Unit
Brand | A One |
Material | Plastic |
Model Name/Number | SPE-96 AE |
Shape | Rectangular |
Capacity | 96 sample |
Temperature Range | 110 Deg C |
Automation Type | Semi-Automatic |
Color | Clear |
The Top Plate vacuum manifold consists of a clear acrylic top allowing for easier inspection of flow rates during SPE 96-well plate processing. The polypropylene base offers excellent chemical resistance while a single remote vacuum gauge/bleed valve controls flow through all the wells.
A Top Plate 96-Well Starter Kit is available to analysts new to 96-well SPE technology. Included with the Starter Kit is Top Plate Vacuum Manifold and sample units of key accessory items necessary for 96-well SPE.
Components:
Starter Kit includes:
1 Top Plate vacuum manifold
1 96 square well collection plate, 2 mL, polypropylene
2 disposable reservoir/waste trays, PVC
1 cluster tube rack
Additional Information:
- Production Capacity: 100/ month
Sterility Testing Vacuum Manifold
Minimum Order Quantity: 1 Piece
Usage/Application | Laboratory |
Brand | A One |
Material | Stainless Steel |
Material Grade | SS316 |
Valve Type | PTFE |
Line Type | 2 Way |
Out Let | 8 x 13 Hose |
Available Range | 1 Branch, 3 Branch, 6 Branch |
MF-47 Disposable Funnel Vacuum Filtration Manifold
Minimum Order Quantity: 3 Unit 01
Usage/Application | Water Testing |
Brand | A One |
Model Name/Number | MF47 |
Shape | Round |
Capacity | 125, 250 ml |
Temperature Range | 130 Deg C |
Filtration Device | Stainless Steel |
Handle | SS 304 |
Effective Filtration Rate | 12.5 cm2 |
Material of Funnel | PP (Polypropylene) |
Filter head | Detachable, screw it with holder |
Membrane Diameter | 47 mm |
Filter Head | 6-place, 3-place , 1-place |
SS Funnel | SS100 (100ml), SS250 (300ml), SS500 (500ml) |
MF series Manifold filtration system adopts membrane filtration, by the use of a certain aperture of sterile membrane intercept microbes and then cultivated and counting.
Applicable to lab microbiological testing of raw materials, semifinished products and finished goods in food, beverage, beer industries, microbial limit test of production water, raw materials, intermediates and finished products in the pharmaceutical industries, microbial detection of ionized water in in the electronics industries and microbial limit test in the environmental monitoring institutions.
- Optimize structure and workflow, take control and convenient
- Assembly and disassembly can only by Top Funnel Connect Head, Vacuum Hose Barb.
- Independent operation of valve and processed handle
- Designed to improve comfortable
- Special Taking membrane groove, easy and safe
- Each side can connect with vacuum pump
- PP and SS funnel for choice(Change Adaptor)
- Accept 47mm membrane.
- Filter head is detachable, easy to sterilize key parts.
- Whole set can be moist heat sterilization and filter head can use flame fast sterilization during test to ensure the accuracy
Additional Information:
- Production Capacity: 1000 / month
3 Way Stainless Steel Vacuum Manifold
Minimum Order Quantity: 1 Piece
Usage/Application | Laboratory |
Brand | A One |
Hose Barb (inch) | 3/8 Inch |
Material | Stainless Steel |
Valve Type | PTFE |
Connect Type | Six Filter |
Distance Between Stations | 10 cm |
- Three-way valves feature PTFE Valve for smooth control
- Valves provide independent control at each branch for vacuum and venting
- Connect three or six filter holders to one vacuum source
- Three-way valve enables you to vent the branch to atmosphere without breaking the vacuum connection
- Three-way valve vent is a female Luer slip connection to accept a standard.
Stainless Steel Manifolds have PTFE valves for each branch to provide individual control of vacuum and air venting. Branches accept no. 8 stoppers. Hose barb adapter accepts 3⁄8″ ID vacuum tubing.
Sterility Test Manifolds feature an extra flushing manifold for sterile buffer with a 1⁄4″ hose barb connection to flushing manifold. Use with Aone sterility test filter holder Autoclavable.