- Home
- ยป
- Our Products
- »
- HPLC-GC Consumable
HPLC-GC Consumable
HPLC Column End Cap
Minimum Order Quantity: 5 Packet
Product Brochure
Size | 1/16 Inch |
Material | Nylon |
Plug Type | Round |
Usage/Application | HPLC Column End Cap |
Brand | A One |
Color | Black & Red |
Socket With Shutter | Yes |
Packaging Type | Packets / 100 PIC |
PKT/100 PIC
COLUMN END PLUGSColumn end plugs are used to prevent HPLC columns from drying out when not in use. Made of hard nylon, these end stoppers are available in packs of 10 and in different colors.• 49027-01B End plugs for HPLC columns. Nylon 10-32 Thread. White. 100/Pack.• 49027-06K End plugs for HPLC columns. Nylon 10-32 Thread. Green. 100/Pack.• 49027-04W End plugs for HPLC columns. Nylon 10-32 Thread. Red 100/Pack.• 49027-06K End plugs for HPLC columns. Nylon 10-32 Thread. Black. 100/Pack.• 49027-04W End plugs for HPLC columns. Nylon 10-32 Thread. Blue . 100/Pack.
Additional Information:
- Production Capacity: 1000000
- Delivery Time: Available
HPLC Sample Filtration kit
Minimum Order Quantity: 1 Number
Usage/Application | Industrial |
Size | 13 mm SS Filter Holder |
Brand | A One Engineering Works |
Application | Laboratory Use |
Needle | HPLC |
Syringe | 5 ml Gas Tight |
Membrane Types Applications:
Nylon 66
- hydrophilic membrane
- filtration rate: fast
- strong protein binding capacity
- solvent compatibility: “weak” organic solvents (alcohols, acetonitrile), aqueous solutions, base solutions, THF
- not recommended for: strong acids, halogenated hydrocarbons
- use: for general filtration and filtration of HPLC samples
PTFE (Teflone)
- hydrophobic membrane
- filtration rate: medium
- low dissolution, best solvent resistance
- solvent compatibility: “strong” organic solvents, strong acids, strong alkalis, chlorinated hydrocarbons
- not recommended for: aqueous solutions
- use: for organic solvents, general filtration and filtration of HPLC samples
M. E. Cellulose (mixed cellulose ester, nitrate and acetate)
- hydrophilic membrane
- filtration rate: medium
- solvent compatibility: aqueous solutions, ”weak” base solutions, hydrocarbons
- not recommended for: ”strong” organic solvents, strong acids, strong bases
- used for the filtration of aqueous solutions, biological samples and HPLC samples
Component:
- 13mm S. S.316 Filter Holder
- HPLC Needle
- 5ml Gas Tight Syringe
- Nylon 66 Membrane Filter13mm x 0.2μ (Pk. of 100 Nos.)
Vial Crimpers and Decappers
Overall Length | 7 Inch |
Usage/Application | Crimping |
Material | Stainless Steel |
Brand | A One |
Color | Black |
Packaging Type | Box |
Pliers type | 20 mm cap |
Crimper Type | 11 mm cap |
Operated | Hand |
- 130475 Hand operated crimper 11mm cap
- 130476 Hand operated decapper, crimper type 11mm cap
- 130528 Decapper, pliers type 11mm cap
- 130587 Hand operated crimper 20mm cap
- 130589 Hand operated decapper, crimper type 20mm cap
- 130592 Decapper, pliers type 20mm cap
Gas Sampling Bomb
Minimum Order Quantity: 2 Piece
Usage/Application | Laboratory |
Shape | Round |
Color | Silver |
Brand | A One |
Material | Stainless Steel |
Material Grade | SS316 |
Features:
- Used to store gas sample
- Available in different sizes and specifications
- Effective corrosion resistance
- Ensure maximum integrity
- Deluxe Gas Sampling Bottles are manufactured in S.S. 316
- Construction Each bottle is tested to hydraulic test pressure of 250 bar.
- Suitable for working pressure of 150 bar
Connections:
Generally GSB have ¼” FEMALE NPT connection on both the side. Needle valve having ¼” MALE NPT connection is connected for a successful connection. We also change the connection end according to customer user.
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
HPLC Fittings
Brand | A One |
Usage/Application | Laboratory Use |
Packaging Type | Box |
Material | Stainless Steel |
Material Grade | SS 316 |
Finish | Polish |
Product Details:
- Exact dimensions
- Precise designs
- Flawless built
- Superior finish
- Corrosion resistance
- Easy to install
HPLC Peek Tubing
Usage/Application | Chemical |
Single Piece Length | 3 meter |
Type | HPLC |
Pressure | 420 Bar |
Material | PVC |
Size/Diameter | 1/2 inch, 1 inch |
We have emerged as the foremost manufacturer, trader, exporter, distributor, wholesaler, importer and supplier of HPLC Peek Tubing that is used in various industries. The offered tubing is manufactured by our experienced professionals using premium quality raw material and modern technology. Furthermore, we offer this tubing in various sizes, thickness and specifications at pocket friendly prices. Our quality controllers test this tubing against various quality parameters.
Features:
- Optimal durability
- Dimensionally accurate
- Light weight
Column End Plug
Minimum Order Quantity: 1000 Piece
Size | 1/16 Inch |
Material | Nylon |
Usage/Application | Chemical Handling Pipe |
Brand | A One |
Tolerance | +/- 0.05 mm (.002") |
Packaging Type | Packets |
Material type | Nylon |
Threads | 10 - 32 |
- Seal analytical columns
- One size fits all
- Fingerprint, with wrench flats as well
Lab Gas Sampling Bomp
Minimum Order Quantity: 2 Piece
Usage/Application | Laboratory |
Shape | Round |
Capacity | 100 ml, 250 ml, 500 ml , 1000 ml and 2000 ml |
Brand | A One |
Material | Stainless Steel |
Packaging Type | Box |
Material Grade | SS316 L |
Pressure | UP to 100- 204 Kg/cm2 (3000 P.S.I) |
The company manufactures gas sampling bomb, which is used to carry plant gases from site to the laboratory. To collect the sample of liquefied Petroleum Gases such as Propane, butane Ethylene and similar materials. These samplers are completely leak-proof and available in specific sizes. These are made from high quality stainless steel. The wall of the sampler is specifically designed so that it can withstand high pressure. These samplers are highly reliable and provide years of trouble free service.
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
Zero Dead Volume Union ZDVU
Model Number/Name | SSUION-1 |
Brand | A One |
Usage/Application | Laboratory Use |
Steel Grade | SS316 |
Temperature Range | 200 Deg C |
Packaging Type | Box |
Thread Size | 1/16 Inch |
Bore Size | 0.3 mm,0.5 mm |
Max. Operating Pressure | 137.8 MPa (1378 bar) (SUS),41.4 MPa (414 bar) (PEEK / SS) |
Zero Dead Volume Union
Size -1/16 SS316L
HPLC Peek Tube
Minimum Order Quantity: 50 mtr
Application | Chemical Handling |
Material | PEEK |
Brand | A One |
Length of Pipe | 3 m |
Size/Diameter | 1/16 Inch |
Pressure | 420 Bar |
Color-coding identifies the ID of your 1/16" OD PEEK tubing – each ID is coded with a different color.
PEEK tubing has the strength required to withstand continuous use at HPLC pressure without swelling or bursting, and is not affected by halide salts, high strength buffers, or other aggressive mobile phases that corrode stainless steel. The polymer surface will not leach metal ions into the eluent or extract metal-sensitive components from the sample. Note however that dichloromethane, THF, and DMSO may cause swelling in PEEK, and concentrated nitric and sulphuric acid will attack PEEK.
Tolerance is ±.0005" for IDs up to .010", and ±.001" for larger IDs.
Tubing ID | Color | Tolerance | Bar* | Psi* | Product No. |
---|---|---|---|---|---|
.004" | Black | ±.0005" | 460 | 6700 | |
.005" | Red | ±.0005" | 460 | 6700 | |
.007" | Yellow | ±.0005" | 440 | 6400 | |
.010" | Blue | ±.001" | 420 | 6100 | |
.020" | Orange | ±.001" | 345 | 5000 | |
.030" | Green | ±.001" | 262 | 3800 |
* Recommended maximum permanent working pressures calculated
from the burst pressure and the factor 2.5
Solvent Inline Filter Stainless Steel For HPLC system 01018-60025
Minimum Order Quantity: 3 Piece
- Stainless steel filter, solvent inlet, 12–14 µm For HPLC
Additional Information:
- Item Code: 0101860025
- Production Capacity: 1000
- Delivery Time: READY
- Packaging Details: BOX
Ss 316 Gas Sampling Bottle With TPED Complains
Minimum Order Quantity: 1 Unit
Product Brochure
Material | Stainless Steel |
Brand | A One |
Usage/Application | Handling Gas & Oil |
Shape | Round |
Capacity | 100 ml, 250 ml, 500 ml, 1000 ml |
Temperature Range | 250 Deg C |
Pressure | Up to 204 Kg/cm2 (3000 P.S.I) |
The company manufactures gas sampling bomb,
which is used to carry plant gases from site to the laboratory.
To collect the sample of liquefied Petroleum Gases such as Propane,
butane Ethylene and similar materials. These samplers are completely leak-proof and available in specific sizes.
These are made from high quality stainless steel.
The wall of the sampler is specifically designed so that it can withstand high pressure.
These samplers are highly reliable and provide years of trouble free service.
โ Sizes Available 100 ml to 50000 ml
โ Working pressures up to 5000 psig (344 bar)
โ 304L and 316L stainless steel materials resist intergranular corrosion. Testing Each CE Certified cylinder also hydrostatically tested to at least 5/3 the working pressure. tested. cylinders are marked data. Volumetric expansion of each cylinder during hydrostatic testing must be within the limits set CE & TPED cylinders are hydrostatically proof tested at 3000 psig (206 bar) minimum
HPLC Peek Ferrules
Minimum Order Quantity: 1000 No
Brand | A One |
Material | Peek |
Color | Brown |
Size | 1/16 Inch |
Packaging Type | Packets |
Pressure Rating | 2000 psi |
Country of Origin | Made in India |
Packaging Size | 10 pcs |
Additional Information:
- Production Capacity: 1000000
- Delivery Time: Ready Stock
Peek Fittings
Minimum Order Quantity: 1000 Piece
Size | 1/16 Inch |
Brand | A One |
Material | Nylon |
Color | Beige |
Packaging Type | Box |
Application | Laboratory |
Fitting, PEEK, Fingertight Short, One-Piece, 10-32 thread, 1/16" OD Tubing (max. 345 bar), pk.10
Material: | PEEK |
Maximum Pressure: | 345bar (5000psi) |
Tubing OD: | 1/16" |
Thread: | 10-32 UNF |
Fitting length: | 20.8mm |
Fitting Head OD | 0.94mm |
Biocompatible | yes |
Additional Information:
- Item Code: Peek_sz
- Production Capacity: 100000
- Delivery Time: 1 week
- Packaging Details: bag
Peek Fittings
Minimum Order Quantity: 10 Piece
Material | Peek |
Size | 1/16 Inch |
Finishing | Machined |
Packaging Type | Packets |
Pressure Rating | Up to 420 Bar (6000 psi) |
Brand | A One |
Temperatures | 150 degree Celsius |
Details:
- Shimadzu Type
- Machined Type
- Agilent Type
Peek Ferrule
Brand | A One Engineering Works |
Material | Peek |
Packaging Type | Box |
Pressure rating | Up to 420 Bar (6000 psi) |
PEEK tubing | 1/16 inch |
HPLC Fitting Type | Coned Fittings |
Used at Temperatures | 150 Degree Celsius |
Peek Ferrules provide secure seals between chromatography columns and injectors and detectors; These are often used in high pressure applications.
Zero Dead Volume SS Union
Minimum Order Quantity: 100 PIECE
Steel Grade | SS316 |
Usage/Application | HPLC |
Color | Silver |
Material | Stainless Steel |
Size | 1/16 Inch |
Brand | A One |
Country of Origin | Made in India |
Bore | 0.5 mm |
Additional Information:
- Production Capacity: 10000
- Delivery Time: Ready stock
- Packaging Details: each pack 10 pcs
PEEK Ferrule
Minimum Order Quantity: 100 PIECE
Color | White |
Material | PEEK |
Brand | A One |
Size | 1/16 Inch |
Packaging Type | Packets |
Packaging Size | 10 Pcs. |
Additional Information:
- Item Code: PEEK-1
- Production Capacity: 100000 / month
Gas Micron Fillter
Minimum Order Quantity: 5 Piece
Usage/Application | Gas |
Brand | A-One |
Length | 5-10 inch |
Finishing | Polish |
Country of Origin | Made in India |
Material | Stainless Steel |
Material Grade | SS 304 L |
Size | 2/4 inch |
Packaging Type | Box |
Peek Union
Material | Peek |
Size/ Diameter | For 1/16" tubing on all 10-32 ports |
Brand | A One Engineering Works |
Usage/ Application | Industrial |
Packaging Type | Box |
Available in Bore Size | 0.25, 0.50, and 0.75 mm |
Maximum Temperature | 100 Deg C |
Rated Pressure | 5,000 psi (350 bar) |
- Ideal for quickly and reliably connecting PEEK tubing in HPLC systems.
- One-piece, finger-tight fittings no ferrules required.
- Low dead volume.
- Included end fittings and body made of biocompatible PEEK.