Call 08048108557 91% Response Rate

Send Email

Sterility Filtration Units

Vacuum Filter Holders and Filtration Accessories Vacuum filter holders Use For filtration of chromatography mobile phases and particulate contamination analysis. Choose the right filter holder for vacuum filtration of aqueous, organic or corrosive liquids.Features & Advantages

  • Available in Multi Models with Two available funnel sizes to accommodate samples up to 250 mL.
  • Holder with 250 mL funnel is equipped with a funnel SS lid, which can be vented using accessory filter unit.
  • Can be autoclaves or flame-sterilised.
Applications

Bacteriological or Particulate Contamination Analysis

  • Glass Vacuum Filter Holders.
  • Stainless Steel Filter Holders.
  • ConicalFilter Holders.
  • &Accessories.
Vacuum Filtration Manifold, Sterility Test Unit, Complete Kit (Duck Clamp)
  • Vacuum Filtration Manifold, Sterility Test Unit, Complete Kit (Duck Clamp)
  • Vacuum Filtration Manifold, Sterility Test Unit, Complete Kit (Duck Clamp)

Vacuum Filtration Manifold, Sterility Test Unit, Complete Kit (Duck Clamp)

Product Price: Rs 24,500 / UnitGet Best Price

Product Details:
Usage/ApplicationLaboratory
Filter FunnelSS 316 with External Aluminum Clamp (O-ring less).
SS Lid & Neoprene Cork Capacity300 ml
Material of ManifoldS.S. With PTFE Valve / 2-Way / 3-way
No of Branches available6
Membrane Filter47 mm / 0.45 mm pack of 100
Vacuum Flask1 Litre
Vacuum Pump DiaphragmType-Oil Free Single Stage
Air Vent FilterHydrophobic PTFE 50 mm/ 0.2 mm
Flexible SiliconTubing 2 m
SS Filter Funnel Capacity500 ml
  • Filter Funnel S.S.316 with External Aluminum Clamp
  • SS Lid & Neoprene Cork Capacity 300 ml
  • Manifold three place S.S. with PTFE valve/2 way
  • Stage-1,3,6
  • Membrane Filter 47 mm/0.45 mm pack of 100
  • Vacuum flask 1 litre
  • Vacuum pump diaphragm type-oil free
  • Air vent filter- Hydrophobic PTFE 50 mm/ 0.2 mm
  • Flexible Silicon Tubing 2 m.
  • Same are SS Filter Funnel Capacity-500 m
Get Best QuoteRequest Callback
EZ-3 Vacuum Filtration Manifold
  • EZ-3 Vacuum Filtration Manifold
  • EZ-3 Vacuum Filtration Manifold

EZ-3 Vacuum Filtration Manifold

Product Price: Rs 8,000 / UnitGet Best Price

Product Brochure

Product Details:
Usage/ApplicationLaboratory
BrandA One
Model NumberEZ-3
Membrane Diameter47 mm
Supported FunnelsPolypropylene, SS-316, Borosilicate Glass, and PSU.
Supported Volume Of Funnel500 ml
No of Branches3
Filtration Area13.5 Cm2
Vacuum Filtration Manifold is used primarily in microbiological, Sterility and analytical procedures that involve collecting a particulate (bacteria, precipitate, etc.) from a liquid suspension. They are particular designed and produced for several samples filtrate at the same time. Because each filter holder has individual control valve, only one set vacuum pump can sustain the single or Multi-branch manifold filter operate together.
  • Two- and three-way valves feature PTFE stopcocks for smooth control
  • Valves provide independent control at each branch for vacuum and venting
  • Connect three or six filter holders to one Vacuum source.


Additional Information:

  • Item Code: AVFM3
Get Best QuoteRequest Callback
GMP-1 Vacuum Filtration Manifold

GMP-1 Vacuum Filtration Manifold

Product Price: Rs 15,000 / SetGet Best Price

Product Details:
Usage/ApplicationLaboratory
MaterialStainless Steel
Model Name/NumberGMP-1
No of Branches1
Membrane Diameter47 mm
Filtration Area13.5 Cm2
Supported FunnelsPolypropylene
Supported Volume Of Funnel125 - 300 ml
They have been designed specifically for applications in which the particles or microorganisms retained on the membrane filter surface are of interest. Simple handling is very important regarding routine examinations. Stainless steel taps in the base allow the vacuum to be turned on and off. Stainless steel and PP funnel, SS funnel & glass funnel for choice.

Optional : 
  • Diaphragm Vacuum Pump
  • Sterile Membrane
  • Flame Sterilization Tool
  • Tweezers
  • Flask Fittings
Get Best QuoteRequest Callback
GMP-3 Vacuum Filtration Manifold

GMP-3 Vacuum Filtration Manifold

Product Price: Rs 18,000 / SetGet Best Price

Product Details:
Usage/ApplicationLaboratory
MaterialStainless Steel
Model Name/NumberGMP-3
No of Branches3
Membrane Diameter47 mm
Filtration Area13.5 Cm2
Supported FunnelsPolypropylene
Supported Volume Of Funnel125 - 300 ml
They have been designed specifically for applications in which the particles or microorganisms retained on the membrane filter surface are of interest. Simple handling is very important regarding routine examinations. Stainless steel taps in the base allow the vacuum to be turned on and off. Stainless steel and PP funnel, SS funnel & glass funnel for choice.

Optional : 
  • Diaphragm Vacuum Pump
  • Sterile Membrane
  • Flame Sterilization Tool
  • Tweezers
  • Flask Fittings
Get Best QuoteRequest Callback
Sterility Testing Vacuum Manifold
  • Sterility Testing Vacuum Manifold
  • Sterility Testing Vacuum Manifold

Sterility Testing Vacuum Manifold

Product Price: Rs 7,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationLaboratory
BrandA One
MaterialStainless Steel
Material GradeSS316
Valve TypePTFE
Line Type2 Way
Out Let8 x 13 Hose
Available Range1 Branch, 3 Branch, 6 Branch
Sterility Testing Vacuum Manifold with 6 stations is an integrated filtration system having a prime application in filtering multiple samples off one vacuum source. It is without filter holders. It is perfectly supported on stainless steel manifold with rugged side supports which keeps the system rigid and firm even while fully loaded Use For West Water, Cosmetics, Pharmaceutical Products Analysis, Bio burden Testing, Water Monitoring Sterility Testing.
Get Best QuoteRequest Callback
Funnel Filter Assembly Holder

Funnel Filter Assembly Holder

Product Price: Rs 6,000 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
Usage/ApplicationLaboratory
BrandA One
Size (mm)25 mm
MaterialStainless Steel
Filtration area12.5 cm2
RingSilicon
SterilizationAutoclave
We are engaged in manufacturing and supplying excellent quality Funnel Filter Assembly Holder to our valuable clients.

Features:
  • The Filter Holder Made of 316 as with electro-polished
  • Excellent chemical resistance sterilized by flame or liquid
  • Special design for microbiology filtration
  • Special adaptor provide for proper sealed

Applications:
  • For micro biology, biochemistry, hydrology (DNA/RNA).
  • Beverage analysis & food testing.
  • Protein binding, gravimetric analysis, California, yeast, mold total bacteria & sterility testing.
  • Ideal for water & waste water analysis.
  • Residue precipitate analysis and contamination tests.
  • General Liquid Filtration.
Get Best QuoteRequest Callback
3 Way Stainless Steel Vacuum Manifold

3 Way Stainless Steel Vacuum Manifold

Product Price: Rs 14,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationLaboratory
BrandA One
Hose Barb (inch)3/8 Inch
MaterialStainless Steel
Valve TypePTFE
Connect TypeSix Filter
Distance Between Stations10 cm
Features:
  • Three-way valves feature PTFE Valve for smooth control
  • Valves provide independent control at each branch for vacuum and venting
  • Connect three or six filter holders to one vacuum source
  • Three-way valve enables you to vent the branch to atmosphere without breaking the vacuum connection
  • Three-way valve vent is a female Luer slip connection to accept a standard.

Stainless Steel Manifolds have PTFE valves for each branch to provide individual control of vacuum and air venting. Branches accept no. 8 stoppers. Hose barb adapter accepts 3⁄8″ ID vacuum tubing.

Sterility Test Manifolds feature an extra flushing manifold for sterile buffer with a 1⁄4″ hose barb connection to flushing manifold. Use with Aone sterility test filter holder Autoclavable.
Get Best QuoteRequest Callback
Sterility Testing Manifold

Sterility Testing Manifold

Product Price: Rs 7,500 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Details:
BrandA One
Connection1/2 inch Hose barb
MaterialStainless Steel
Material GradeSS-316
ApplicationLaboratory
FinishPolish
Backed with the support of experts, we are engaged in providing a flawless range of Sterility Testing Manifold to the valuable patrons.

Features:

  • The filter manifold mode of AS-316 with Teflon valve
  • For excellent chemical resistance and can be vastly sterilized by flame, steam and oven.
  • Individual control Teflon valve.
  • Compatible to mounting silicon stopper with vacuum holder.
  • Special adaptors provide for proper vacuum holder fitting.
  • Fully leak-proof platform.
  • Lightweight to handle easy.

Applications:
  • Filtration for microbiology test.
  • General liquid filtration.
  • Chemical experiment.
Get Best QuoteRequest Callback
Buffer Filtration Assembly

Buffer Filtration Assembly

Product Price: Rs 10,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationHigh Performance Liquid Chromatography
Diameter47 mm
BrandA One
Item Code3932014
Area13.5 cm
MaterialSS, Borosilicate Glass
Flow Rate45 LPM
Voltage230 VAC
Filter Medium MaterialSS
Size47 mm
Steel GradeSS 316

Technical Data of Solvent Filter:

Funnel

Pore Size of Support Screen

Material of Support Screen

Receicing Bottle

Suitable Membrane

Connection

Glass 300ml

100um

Borosilicate Glass

1000ml

φ47

Ground

Glass 300ml

100um

Borosilicate Glass

1000ml

φ47

Stopper

SS316 300ml

600um

SS316

1000ml

φ47

Stopper

Glass 500ml

100um

Borosilicate Glass

None

φ47

Stopper

SS316 300ml

600um

SS316

None

φ47

Stopper

 

This product is made of high-quality extra hard glass. It is sparking and clear. Its thickness is even. The performance of withstanding voltage and its leakproofness is very good, and its size agrees with the international standard size.

It can be used for sterilization at high temperature and high pressure. It is mainly used in the filtration of HPLC mobile phase and has the function of outgas to guarantee the clean of mobile phase and avoid the blockage of HPLC liquid flow path.

We have various types of glass holders. B40  type is connected by ground glass. Type Rubber Stopper is connected by stopper.

 

Get Best QuoteRequest Callback
GMP Model 7 Filtration Manifold
  • GMP Model 7 Filtration Manifold
  • GMP Model 7 Filtration Manifold

GMP Model 7 Filtration Manifold

Product Price: Rs 25,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/ApplicationIndustrial
PressureMax 200 bar
Valve Size1/2 Inch
Size3 Station
BrandA One
Capacity300 ml
MaterialSS 316L
Material GradeSS 304

Other Details:

  • Oil Sampling Cylinder
  • LPG Sampling Bottle
  • LPG Sampling Cylinder
  • Transform Oil Sample Cylinder


Oil/Gas sampling bottle
 are specially designed to collect and store high pressure Oil/Gas samples from the field & transport the same to laboratories. Procured from well-established manufacturers, these are made to undergo rigorous quality control tests to ensure high performance.

 

Features:

  • Used to store oil/gas samples
  • Ensure maximum integrity
  • Effective corrosion resistance
  • Available in different sizes and specifications
  • Most competitive price

 

No

Containers

Make

Capacity

Filling Pressure

1

Disposable Oil/Gas Canister

S.S. 316

500ml

20, 40 kgs / cm

2

Steel Sampling Bottles

S.S. 316

100ml, 250ml, 500ml

120 kg / cm

3

Cylinders

S.S. 316

3, 10, 47 ltrs. W/C 10 ltrs. W/C

130 kg / cm
130 kg / cm


We manufacture quality gas/oil sampling bottles. The product & the Quality Laboratories, Refineries, mines, chemical Industries, Fertilizer, pharmaceutical Enterprises.

  • Aone Gas/Oil Sampling Bottles are manufactured in S.S. 316/304 construction.
  • Each bottle is tested to hydraulic test pressure of 250 bar.
  • Suitable for working pressure of 150 bar.
  • The company manufactures gas sampling bomb, which is used to carry plant


Additional Information:

  • Item Code: GMP3
  • Production Capacity: 100
  • Delivery Time: 1 week
  • Packaging Details: standard packing
Get Best QuoteRequest Callback
Sterility Testing Vacuum Manifold

Sterility Testing Vacuum Manifold

Product Price: Rs 15,000 / PackGet Best Price

Minimum Order Quantity: 1 Pack

Product Details:
Usage/ApplicationDental
Type Of SterilizerSteam Sterilizer
Chamber Volume0-5 Litre
Thread Size1/4 NPT
Insulation WallTriple Wall
Automation GradeManual
Line Type2 Way
Out Let8 x 13 Hose
Material GradeSS316
Valve TypePTFE
MaterialStainless Steel
Sterility Testing Vacuum Manifold with 6 stations is an integrated filtration system having a prime application in filtering multiple samples off one vacuum source. It is without filter holders. It is perfectly supported on stainless steel manifold with rugged side supports which keeps the system rigid and firm even while fully loaded Use For West Water, Cosmetics, Pharmaceutical Products Analysis, Bio burden Testing, Water Monitoring Sterility Testing.

Additional Information:

  • Item Code: 254784
  • Production Capacity: 100000 / month
Get Best QuoteRequest Callback
Micro Filtration Manifold Unit
  • Micro Filtration Manifold Unit
  • Micro Filtration Manifold Unit

Micro Filtration Manifold Unit

Product Price: Rs 7,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationSterility Testing
Model Name/NumberEZ3
Automation TypeAutomatic
BrandA One
MaterialStainless Steel
Outlet Connection1/2 Hose Barb

Owing to our knowledge and massive understanding in this sphere, we have been readily immersed in offering to our esteemed clients a quality assured array of Micro Filtration Manifold Unit.



Additional Information:

  • Production Capacity: 1000
  • Delivery Time: ready stock
  • Packaging Details: standard packing
Get Best QuoteRequest Callback
Vacuum Filtration Manifold, Sterility Test Manifold 1-3-6-Branch
  • Vacuum Filtration Manifold, Sterility Test Manifold 1-3-6-Branch
  • Vacuum Filtration Manifold, Sterility Test Manifold 1-3-6-Branch
  • Vacuum Filtration Manifold, Sterility Test Manifold 1-3-6-Branch
  • Vacuum Filtration Manifold, Sterility Test Manifold 1-3-6-Branch

Vacuum Filtration Manifold, Sterility Test Manifold 1-3-6-Branch

Product Price: Rs 15,500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationMicrobiology
MaterialStainless Steel
ModelA-ONEST47XC
BrandAONE
Filter HolderWithout
Material GradeSS 304
Number of Branches1,3,6
FinishPolish
ApplicationLaboratory

SS Sterility Test Manifold System with 6 stations is an integrated filtration system having a prime application in filtering multiple samples off one vacuum source. It is without filter holders. It is perfectly supported on stainless steel manifold with rugged side supports which keeps the system rigid and firm even while fully loaded Use For West Water, Cosmetics, Pharmaceutical Products Analysis, Bio burden Testing, Water Monitoring Sterility Testing.

Get Best QuoteRequest Callback
Manifolds Vacuum Filtration

Manifolds Vacuum Filtration

Product Price: Rs 45,000 / PieceGet Best Price

Product Details:
Usage/ApplicationLaboratory
Model Name/NumberGMP-6
BrandA One
MaterialStainless Steel
Material GradeSS 316
Capacity125 - 300 ml
Membrane Pore Size0.45 um Grid Membrane
No of Branches6
Filtration Area13.5 Cm2
Supported FunnelsPolypropylene
Membrane Diameter47 mm
They have been designed specifically for applications in which the particles or microorganisms retained on the membrane filter surface are of interest. Simple handling is very important regarding routine examinations. Stainless steel taps in the base allow the vacuum to be turned on and off. Stainless steel and PP funnel, SS funnel & glass funnel for choice.

Optional :
  • Diaphragm Vacuum Pump
  • Sterile Membrane
  • Flame Sterilization Tool
  • Tweezers
  • Flask Fittings


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
Get Best QuoteRequest Callback
GMP Model Filtration Manifold
  • GMP Model Filtration Manifold
  • GMP Model Filtration Manifold

GMP Model Filtration Manifold

Product Price: Rs 20,000 / PieceGet Best Price

Minimum Order Quantity: 2 Piece

Product Details:
ModelGMP
MaterialStainless Steel
Usage/ApplicationLaboratory
BrandA One
Country of OriginMade in India
No of Branches3
Membrane Diameter47 mm Effective
Filtration Area13.5 Cm2
Supported FunnelsPolypropylene
Supported Volume Of Funnel300 ml

They have been designed specifically for applications in which the particles or microorganisms retained on the membrane filter surface are of interest. Simple handling is very important regarding routine examinations. Stainless steel taps in the base allow the vacuum to be turned on and off. Stainless steel and PP funnel, SS funnel & glass funnel for choice.


Optional :

Diaphragm Vacuum Pump, Sterile Membrane, Flame Sterilization Tool, Tweezer, Flask Fittings

  • Disposable, stack able, recyclable polypropylene 100ml or 250ml funnels
  • Eliminates autoclaving and minimizes waste
  • Manifold-mounted supports for laboratory use or stand-alone supports for onsite filtration
  • “Push-fit” funnels seal tightly to manifold supports without clamps or O-rings
  • Leak-free operation and uniform micro-organism recoveries
  • Faster than all-glass filter apparatus
  • Lever breaks vacuum and lifts membrane for removal with forceps


Additional Information:

  • Item Code: GMP4
  • Production Capacity: 100
  • Delivery Time: 1 week
  • Packaging Details: standard packing
Get Best QuoteRequest Callback
Sterility Micro Filtration Manifold
  • Sterility Micro Filtration Manifold
  • Sterility Micro Filtration Manifold
  • Sterility Micro Filtration Manifold

Sterility Micro Filtration Manifold

Product Price: Rs 10,000 / PieceGet Best Price

Product Details:
Usage/ApplicationLaboratory
BrandA One Engineering Works
MaterialStainless Steel
Material GradeSS304
Surface FinishPolished
Number of Branches3
This cost-effective Micro Filtration system uses presterilized, ready-to-use funnels filtration support. Convenient, easy to use system for well-accepted membrane filtration method conforms to international standards: CE, Standard Methods, WHO Disposable, stackable, light, recyclable plastic Microfit funnels eliminate autoclaving and minimize waste “Push lock” Microfit funnels tightly seal to manifold supports without clamps or O-rings assuring leak-free operation and uniform microorganism recoveries Novel device lifts mem/pane after filtration, for easy removal with forceps Unique Microfit support filters faster than all-glass filter apparatus Select manifold-mounted filtration supports for laboratory use or stand-alone on-site filtration supports 100 mL or 250 mL funnels available.

Additional Information:

  • Production Capacity: 10
  • Delivery Time: 1 week
  • Packaging Details: standard packing
Get Best QuoteRequest Callback
Sterility Test Manifold 6  Place
  • Sterility Test Manifold 6  Place
  • Sterility Test Manifold 6  Place
  • Sterility Test Manifold 6  Place

Sterility Test Manifold 6 Place

Product Price: Rs 12,000 / UnitGet Best Price

Minimum Order Quantity: 5 Unit

Product Brochure

Product Details:
MaterialStainless Steel
Model Number/NameEZ6
Usage/ApplicationMicrobiology, Bioburden Test
Type Of SterilizerFormaldehyde Sterilizer
Packaging TypeBox
Warranty1 Year
Automation GradeManual
BrandA One
Material GradeSS 316L
Sterility Test Manifold 6 Place is used primarily in microbiological, Sterility and analytical procedures that involve collecting a particulate (bacteria, precipitate, etc.) from a liquid suspension. They are particular designed and produced for several samples filtrate at the same time. Because each filter holder has individual control valve, only one set vacuum pump can sustain the single or Multi-branch manifold filter operate together. Two- and three-way valves feature PTFE stopcocks for smooth control Valves provide independent control at each branch for vacuum and venting Connect three or six filter holders to one Vacuum source.
Get Best QuoteRequest Callback
Sterility Test Apparatus
  • Sterility Test Apparatus
  • Sterility Test Apparatus
  • Sterility Test Apparatus

Sterility Test Apparatus

Product Price: Rs 8,000 / UnitGet Best Price

Minimum Order Quantity: 5 Unit

Product Brochure

Product Details:
Model Number/NameEZ3
Usage/ApplicationWater Testing
Warranty1 Year
BrandA One
Temperature Range121 D at 15 minutes
Approval CertificateISO 9001 2008
Automation GradeManual
MaterialStainless Steel
Details:
  • 1-place or 3-6-place
  • Support cup accepts a No.8 
  • Features a flushing manifold


Applications requiring a closed system, as in sterility testing, use the sterility test manifold. It features a rear-mounted flushing or rinse manifold pipe which allows liquid to be brought aseptically up into the funnel without contamination. The durable type 316 stainless steel can be autoclaved and used for applications in Water Quality, Food and Beverage, and Pharmaceutical Industries.



Additional Information:

  • Item Code: EZ3
Get Best QuoteRequest Callback
EZ-1 Vacuum Filtration Manifold
  • EZ-1 Vacuum Filtration Manifold
  • EZ-1 Vacuum Filtration Manifold

EZ-1 Vacuum Filtration Manifold

Product Price: Rs 7,500 / UnitGet Best Price

Product Brochure

Product Details:
Usage/ApplicationLaboratory
BrandA One
Model Name/NumberEZ-1
Product TypeBiology Lab Equipment, Water Testing Equipment
Supported Volume Of Funnel300 ml
Membrane Diameter47 mm
Filtration Area13.5 Cm2
Supported FunnelsPolypropylene,SS-316,Borosilicate Glass,and PSU
No of Branches1
Vacuum Filtration Manifold is used primarily in microbiological, Sterility and analytical procedures that involve collecting a particulate (bacteria, precipitate, etc.) from a liquid suspension. They are particular designed and produced for several samples filtrate at the same time. Because each filter holder has individual control valve, only one set vacuum pump can sustain the single or Multi-branch manifold filter operate together.
  • Two- and three-way valves feature PTFE stopcocks for smooth control
  • Valves provide independent control at each branch for vacuum and venting
  • Connect three or six filter holders to one Vacuum source

Optional :
  • Diaphragm Vacuum Pump
  • Sterile Membrane
  • Flame Sterilization Tool
  • Tweezer
  • Flask Fittings


Additional Information:

  • Item Code: AVFM1
Get Best QuoteRequest Callback
MF-47 Disposable Funnel Vacuum Filtration Manifold

MF-47 Disposable Funnel Vacuum Filtration Manifold

Product Price: Rs 35,000 / Unit 01Get Best Price

Minimum Order Quantity: 3 Unit 01

Product Details:
Usage/ApplicationWater Testing
BrandA One
Model Name/NumberMF47
ShapeRound
Capacity125, 250 ml
Temperature Range130 Deg C
Filtration DeviceStainless Steel
HandleSS 304
Effective Filtration Rate12.5 cm2
Material of FunnelPP (Polypropylene)
Filter headDetachable, screw it with holder
Membrane Diameter47 mm
Filter Head6-place, 3-place , 1-place
SS FunnelSS100 (100ml), SS250 (300ml), SS500 (500ml)

MF series Manifold filtration system adopts membrane filtration, by the use of a certain aperture of sterile membrane intercept microbes and then cultivated and counting.

 

Applicable to lab microbiological testing of raw materials, semifinished products and finished goods in food, beverage, beer industries, microbial limit test of production water, raw materials, intermediates and finished products in the pharmaceutical industries, microbial detection of ionized water in in the electronics industries and microbial limit test in the environmental monitoring institutions.

  • Optimize structure and workflow, take control and convenient
  • Assembly and disassembly can only by Top Funnel Connect Head, Vacuum Hose Barb.
  • Independent operation of valve and processed handle
  • Designed to improve comfortable
  • Special Taking membrane groove, easy and safe
  • Each side can connect with vacuum pump
  • PP and SS funnel for choice(Change Adaptor)
  • Accept 47mm  membrane.
  • Filter head is detachable, easy to sterilize key parts.
  • Whole set can be moist heat sterilization and filter head can use flame fast sterilization during test to ensure the accuracy


Additional Information:

  • Production Capacity: 1000 / month
Get Best QuoteRequest Callback
Vacuum Filtration Manifold For Membrane Filtration
  • Vacuum Filtration Manifold For Membrane Filtration
  • Vacuum Filtration Manifold For Membrane Filtration
  • Vacuum Filtration Manifold For Membrane Filtration
  • Vacuum Filtration Manifold For Membrane Filtration
  • Vacuum Filtration Manifold For Membrane Filtration
  • Vacuum Filtration Manifold For Membrane Filtration

Vacuum Filtration Manifold For Membrane Filtration

Product Price: Rs 25,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Usage/Applicationwater testing,Microbiology
BrandA-ONE
MaterialStainless Steel
Model Name/NumberMicroFil-47
ShapeRectangular
Capacity250 ml
Temperature Range120d @15 minuts

Product Description:

Vacuum Filtration Manifold is used primarily in microbiological, Sterility and analytical procedures that involve collecting a particulate (bacteria, precipitate, etc.) from a liquid suspension. They are particular designed and produced for several samples filtrate at the same time. Because each filter holder has individual control valve, only one set vacuum pump can sustain the single or Multi-branch manifold filter operate together.

  • Two- and three-way valves feature PTFE stopcocks for smooth control
  • Valves provide independent control at each branch for vacuum and venting
  • Connect three or six filter holders to one Vacuum source

Specification :   

  • Material Of Manifold: Stainless Steel
  • No of Branches: 1,3,6 With PTFE Valve
  • Membrane Diameter: 47mm Effective Filtration Area: 13.5 Cm2.
  • Supported Funnels:  Polypropylene, SS-316, Borosilicate Glass, and PSU.
  • Supported Volume Of SS Funnel: 300ml, 500ml, and 1000ml.


Additional Information:

  • Item Code: MicroFil-47
  • Production Capacity: 1000000 pic
  • Delivery Time: 1-2 week
  • Packaging Details: Wooden
Get Best QuoteRequest Callback
Laboratory Filtration Manifold

Laboratory Filtration Manifold

Product Price: Rs 17,500 / PieceGet Best Price

Product Details:
Usage/Applicationwater testing , Microbiology
BrandAone
MaterialPlastic
Capacity250 ml
Temperature Range120d @15 minuts
Automation TypeSemi-Automatic
Country of OriginMade in India
The membrane filtration (MF) technique is a method of analyzing samples for microbial contamination. An aqueous solution is pulled through a membrane filter, and the filter is placed on microbiology growth media then incubated. After a prescribed incubation period, colonies are counted, reviewed for appropriate morphology, and results reported in colony forming units (CFUs). Bioburden testing of filterable products is performed to determine the number of viable and reproducible microorganisms. By recovering organisms on and in a membrane filter, processing efficiency and the microbial quality of a sample can be evaluated to assure that the product is not harmful to the intended recipient. Detecting spoilage microorganisms are critical for foods and beverages as they may be responsible for the deterioration of sensory qualities (visual, texture, and taste) and may potentially render the product harmful for consumption. By using membrane filtration, the recovery and detection of the spoilage microorganisms will keep the contaminated items from reaching the market. Monitoring for the compliance of drinking water standards via MF technique determines if there are levels of pathogenic microorganisms in treated water or wastewater. These microorganisms include coliforms such as Escherichia coli (E. coli) and Legionella which are both classified as pathogens. The Pall Laboratory Manifold is uniquely designed for easy adaptability to your microbiological method for the filtration of aqueous solutions by MF technique. The manifold features convenient interchangeable parts, a coupling device for modular connection as well as an attachment to any standard laboratory vacuum system. Thus providing maximum processing while maintaining compliance to regulatory standards


Available  3 stage , 6 stage 


Get Best QuoteRequest Callback
Sterility Test Unit Complete Kit
  • Sterility Test Unit Complete Kit
  • Sterility Test Unit Complete Kit

Sterility Test Unit Complete Kit

Product Price: Rs 22,500 / UnitGet Best Price

Product Brochure

Product Details:
BrandA One
No of Branches6
Material Of ManifoldSS With PTFE Valve / 2-Way / 3-way
Filter FunnelSS316 With Inbuilt SS Clamp (With MOC Test Report)
SS Lid & Neoprene Cork Capacity300 ml
Membrane Filter47 mm/0.45 Mm Pack Of 100
Vacuum Flask1 Litre
Vacuum Pump DiaphragmType-Oil Free Single Stage
Air Vent FilterHydrophobic PTFE 50 mm/ 0.2mm
Flexible SiliconTubing 2 m

 

    Get Best QuoteRequest Callback
    Filtration Flask Holder

    Filtration Flask Holder

    Product Price: Rs 2,800 / PieceGet Best Price

    Minimum Order Quantity: 5 Piece

    Product Details:
    MaterialStainless Steel
    BrandA One Engineering Works
    Filter holder47 mm
    Funnel Capacity500 ml
    Reciver Capacity1000 ml
    Material GradeSS304
    Surface FinishPolished
    ApplicationLaboratory
    It's basic technique for the separation of suspended solids in a fluid (liquid or gas) by means of a filter from the force of gravity or by creating a vacuum circuit. The technical characteristics of the filter will allow the retention of a greater size of the solid substances allowing to pass the smaller ones. 47 mm membrane filters retain particles depending on the pore and are measured in microns (µm). One micron equals one thousandth of a millimetre: 1 µm = 0.001 mm. See in the accessory the elements to form a complete filtration equipment. We also have Complete Filtration Equipment.
    Get Best QuoteRequest Callback

    EXPLORE MORE CATEGORIES

    Looking For "Sterility Filtration Units"?
    Thank youYour Enquiry has been sent successfully.
    © A One Engineering Works. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.